24 Second Shot Clocks


Posted on Feb 5, 2014

To start in 24 seconds; 24s LOAD SW and Reset SW should be push simultaneously. If not, the count will start in 99. Pulse input can be connected to 555 astable multivibrator but must be calibrated for real time clock. The PAUSE SW must have a Switch Debouncer so that the counter will count normal when counting is paused and then turn-on. When the


24 Second Shot Clocks
Click here to download the full size of the above Circuit.

count reach 00, the NOR gate will have an output of logic1 that will turn on the two transistor. The buzzer will rung and light will turn on. The two transistors are continuously turn-on not until LOAD SW and Reset SW is push. All have a +5v power supply.




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    Zener Diode Tester
    Lead Acid Battery Discharge protector
    Speech with XR-T5995
    Latching Continuity Checker
    Control motor PWM schematic
    Damped Oscillations Start with a Delay
    bugbot
    RF field strength meter
    Original 2N2/40 Schematic Diagrams
    Circuit audio pre-amplifier integrated circuit LM358 dual op amp
    IB31 internal functional block diagram and pin functions



    Top