Automatic Room light Control With Bi Directional Visitor Counter

Posted on Feb 5, 2014

The objective of this project is to make a controller based model to count number of persons visiting particular room and accordingly light up the room. Here we can use sensor and can know present number of persons. In today`s world, there is a continuous need for automatic appliances with the increase in standard of living, there is a sense of urg

Automatic Room light Control With Bi Directional Visitor Counter
Click here to download the full size of the above Circuit.

ency for developing circuits that would ease the complexity of life. The IR transmitter will emit modulated 38 kHz IR signal and at the receiver we use TSOP1738 (Infrared Sensor). The output goes high when the there is an interruption and it return back to low after the time period determined by the capacitor and resistor in the circuit. I. e. around 1 second. CL100 is to trigger the IC555 which is configured as monostable multivibrator. Input is given to the Port 1 of the microcontroller. Port 0 is used for the 7-Segment display purpose. Port 2 is used for the Relay Turn On and Turn off Purpose. LTS 542 (Common Anode) is used for 7-Segment display. And that time Relay will get Voltage and triggered so light will get voltage and it will turn on. And when counter will be 00 that time Relay will be turned off. Reset button will reset the microcontroller. Microcontroller based Visitor Counter. This circuit diagram shows how a 555 timer IC is configured to function as a basic monostable multivibrator. A monostable multivibrator is a timing circuit that changes state once triggered, but returns to its original state after a certain time delay. It got its name from the fact that only one of its output states is stable. It is also known as a one-shot`. In this circuit, a negative pulse applied at pin 2 triggers an internal flip-flop that turns off pin 7 ²s discharge transistor, allowing C1 to charge up through R1. At the same...

Leave Comment

characters left:

Related Circuits

  • New Circuits



    Popular Circuits

    Simple CB transmitter with BD329
    Ethernet board for C64 and SX-64
    Single-Chip Chime
    telephone call voice changer
    Hakko 936 ceramic heater A1321
    Portable Solar Powered Lantern Circuit
    1999 mercury sable: wiring diagram illumination a 3.0L vin U. I
    More op-amp circuits
    6 static display circuit
    INA217 professional miniature microphone microphone circuit diagram of a typical preamp