DC to DC Converter 6


Posted on Feb 6, 2014

This circuit is used IC number NE555 set up to stable multi vibrator. It produces a frequency rectangular patch of about 100 Hz. Out to pin 3 through C3 and C4. Before the rectifier power section. Both positive and negative DC 2 series. Positive power supply will work with the rectifier D1 and D2. When a positive signal to be via D2 to the output. And


DC to DC Converter 6
Click here to download the full size of the above Circuit.

filtered from C5 to filter the pressure to smooth again. But if there is negative signal to the D1 and down through the ground. The negative power of the D3 and D4 the rectifier. When a negative signal to the output signal to be via D3. And will be filtered from C6 to smooth again. When a positive signal to be via a D4 to ground. When the power supply input to IC1 is the output pin 3 at a frequency of 1 kHz. The frequency is Q1 and Q2, which will continue to use push pool work interchangeably. If this is the positive output signal Q1 Q2 will run the delete function this reason, C2 and C3 capacitors are half-wave alternating. Work of the circuit is IC1, R1, R2 and C1. The range of the A Stable Multi Vibrator, and the output is a square wave. It is a positive signal pulse frequency of 2. 3 kHz output pin 3 of IC1. And C3 and D1 connected to circuit CLAMP. That it serves to signal a positive pulse to pulse signal negative. The D2 and C3 act negative pulse signal is converted direct current (DCV) electrical signals. The negative power. Thus the output voltage to a negative DC electrical. This circuit is power supply circuit, again the circuit that have the merit is if we want dc voltage 12V but, we have 6 volt only the circuit can modify DC voltage 6 Volt be 12VDC get. The principle works of the circuit is Q1, Q2, R1, R2, R3, R4, R5, D1, C1 and C2 build the circuit is model astable multi vibrator give output be Square Wave....




Leave Comment

characters left:

New Circuits

.

 


Popular Circuits

White led driver
car tracking device circuit diagram
la1800 portable am fm radio circuit
rgb color sensor on arduino
fm oscillator with bly87
Wein Bridge Oscillator using ic 741 op amp
Telephone operated remote control using PIC16F84A microcontroller
ULTRASONIC CONTROL RECEIVER
Efficient inverter control circuit



Top