Electronic Roulette wheel with 20 LEDs and with 36 LEDs


Posted on Feb 4, 2014

In this electronic roulette wheel (see Fig. 1. ) the timer 555 works as a generator of pulses with fading frequency. The counter 4017 switches LED`s one by one in the selected string, and the divider by two based on D-type flip flop (4013 IC) selects the LED`s strings. Actually the base of this circuit diagram is the counter DD2 and the string of L


Electronic Roulette wheel with 20 LEDs and with 36 LEDs
Click here to download the full size of the above Circuit.

EDs D1. D10 (if we connect the resistor R6 to the ground and remove the D-trigger and LEDS DD11. DD20 from the circuit then we get simple electronic roulette wheel with 10 light-emitting diodes), so by adding a D-trigger to the circuit we can add more LED`s. When the button SB1 ("Spin") is first pressed and then released, the generator produces pulses with frequency that getting lower, and at the end the generator stops. The decade counter DD2 counts this pulses, and the state of its outputs changes with every pulse. The light emitting diodes is connected in tho strings D1. D10 or D11. D20 lights up one by one (it looks like it "spins"). At the end an only one LED will illuminate. It is imitate a roulette spin. The DD3 divider by two changes its state every 10 pulses, and this divider selects the first or the second string of LEDs. Resistors R6, R7 prevents overload of outputs of DD3 flip flop trigger. All inputs of the second flip flop of IC DD3 should be grounded. The 555 integrated circuit produces pulses. When the power switch SA1 is on and the button SB1 is pressed then the frequency of the timer is constant. When the button SB1 is released then the frequency of the timer will slowly fading down. The capacitor C2 was charged while the button SB1 was pressed, so now C2 discharges through resistors R2, R3, capacitor C3 and the output "DIS" ("discharge") of the 555 IC. Because the current that charges the capacitor C3...




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    cto frequency converter
    Laser Activated Switch
    12v power supply circuit
    DC motor driver circuit design using LM628 LM629 dedicated motion-control processors
    Sound Blaster Microphone Preamplifier
    High Quality Intercom
    LED flashlight based on a white LED
    Diode Laser Power Supplies



    Top