Guitar phaser effect


Posted on Feb 5, 2014

Each CdS cell acts as a variable resistor in a single variable phase-shift circuit and there are six such individual phase shifters arranged in series, each increasing the overall shift. The LED`s brightness is modulated by an oscillator (bottom section of the circuit) whose frequency can be adjusted by the Speed pot. Max and min illumination are


Guitar phaser effect
Click here to download the full size of the above Circuit.

adjustable - the LED should not extinguish. The LDRs control the shift of the six stages of the phase shifter. This phase shifter has overall feedback, varied by the Intensity control, to alter the intensity of the phasing effect by altering the overall phase shift. Apart from that, there is an input buffer (top right) whose output feeds the phase shifter and also feeds through to the mixer stage where it is mixed with the phased signal. I hope there are no errors in the circuit but it is given as is, without any obligation but of course we will answer all reasonable queries. Unfortunately I have been out of audio for some time now so cannot give too much assistance. Modern phasers will use a digital delay line circuit, but this discrete version works and illustrates all the principles involved.




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    RS232 cable modem
    Wien bridge oscillator II
    Output-limiter
    Alternating Relay Switch
    Supply Voltage Indicator
    The high-accuracy arbitrary waveform generator based on DDS is designed
    Keyboard Interfacing to 8051
    SERIAL to USB Home Made Using ATmega8
    Connect to the PIC Microcontroller
    cascading shift registers to drive 7-segment displays with PC input
    Yves OESCH HB9DTX Transceivers modifications
    Overload protection circuit diagram of 25 ohm speaker
    Hotel ultrasonic interference detection system based on ultrasonic probe DSP interference US0012



    Top