Transistor Based Burglar Alarm - Adding Extra Zones

Posted on Feb 7, 2014

You can add as many extra zones as you like to the Transistor Burglar Alarm System. The first circuit is designed to be used with the usual types of normally-closed input devices such as - magnetic-reed contacts - micro switches - foil tape - and PIRs. The second circuit has an additional normally-open trigger for use with devices such as pressur

Transistor Based Burglar Alarm - Adding Extra Zones
Click here to download the full size of the above Circuit.

e mats. The Green LEDs are there to tell you that the various trigger circuits are intact. They should all be lighting - before you set the alarm. Otherwise - the Siren will sound the instant you operate the control switch. This module has four separate zones. Each can be triggered by normally-closed devices such as - magnetic-reed contacts - passive infra-red detectors - foil tape etc. Zone 4 has an additional input for normally-open devices such as pressure-mats.

Leave Comment

characters left:

Related Circuits

  • New Circuits



    Popular Circuits

    Astable oscillator
    obstruction detector with 12c508 ir
    remote control circuit through radio
    clap switch
    Fuse with status indicator
    Voltage Level Translator
    emf meter project
    PWM Modulator
    Low cost temperature data logger using PIC
    Line-Following Mini-Tank - Schematic
    Crystal-Oscillator Circuits
    Bicycle Radio easy and cheap to build (April 1940)
    INA331 332 configured to directly drive the capacitive input A D converter circuit