Wireless On-Off Switch


Posted on Feb 5, 2014

Normally home appliances are controlled by means of switches, sensors, etc. However, physical contact with switches may be dangerous if there is any shorting. The circuit described here requires no physical contact for operating the appliance. You just need to move your hand between the infrared LED (D2) and the phototransistor (Q1). The infrared


Wireless On-Off Switch
Click here to download the full size of the above Circuit.

rays transmitted by D2 is detected by the phototransistor to activate the hidden lock, flush system, hand dryer or else. This circuit is very stable and sensitive compared to other AC appliance control circuits. It is simple, compact and cheap. Current consumption is low in milliamperes. The circuit is built around an IC CA3140, D2, phototransistor and other discrete components. When regulated 5V is connected to the circuit, D2 emits infrared rays, which are received by phototransistor Q1 if it is properly aligned. The collector of Q1 is connected to non-inverting pin 3 of IC1. Inverting pin 2 of IC1 is connected to voltage-divider preset R4. Using preset R4 you can vary the reference voltage at pin 2, which also affects sensitivity of the phototransistor. Op-amp IC1 amplifies the signal received from the phototransistor. Resistor R3 controls the base current of transistor BC548 (Q2). The high output of IC1 at pin 6 drives transistor Q2 to energies relay RL1 and switch on the appliance, say, hand dryer, through the relay contacts. The working of the circuit is simple. In order to switch on the appliance, you simply interrupt the infrared rays falling on the phototransistor through your hand. During the interruption, the appliance remains on through the relay. When you remove your hand from the infrared beam, the appliance turns off through the relay. Assemble the circuit on any general-purpose PCB. Identify the resistors...




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    RF Dummy load
    Electronic Siren with 2 transistors
    Watchdog Timer/Alarm
    Digital pulse counter
    sine wave generator circuit
    555 and 556 Timer Circuits
    light dark sensor with relay circuit
    guild brian may box
    EUA2123 20-W Stereo Class-D Audio Power Amplifier
    Laser Beams and 555
    555 capacitance tester circuit diagram
    Having a cold junction compensation Remote Isolated Thermocouple transmitter circuit diagram ISO102 XTR101
    Ramp generator circuit diagram



    Top