mains pulse circuit


Posted on Feb 7, 2014

This is a circuit that used to main pulse. The pulser is intended to switch the mains voltage on and off at intervals between just under a second and up to 10 minutes. This is useful, for instance, when a mains-operated equipment is to be tested for long periods, or for periodic switching of machinery. Transformer Tr1, the bridge rectifier, and r


mains pulse circuit
Click here to download the full size of the above Circuit.

egulator IC1 provide a stable 12V supply rail for IC2 and the relay. The timer is arranged so that the period-determining capacitor can be charged and discharged independently. Four time ranges can be selected by selecting capacitors with the aid of jumpers. Short-circuiting positions 1 and 2 gives the longest time, and short-circuiting none the shortest. Here`s the figure of the schematic circuit diagram; In the latter case, the 10 µF capacitor at pins 2 and 6 of the timer IC determines the time with the relevant resistors. The value of this capacitor may be chosen slightly lower. The two preset potentiometers enable the on and off periods to be set. The 1k resistor in series with one of the presets determines the minimum discharge time. The timer IC switches a relay whose double-pole contacts switch the mains voltage. The LEDs indicate whether the mains voltage is switched through (red) or not (green). The 100mA slow fuse protects the mains transformer and low-voltage circuit. The 4 A medium slow fuse protects the relay against overload.




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    100 Mhz frequency period counter
    Engine Block Heater Minder Circuit
    Modify a 2000-2002 Neons Side Markers to Blink
    Stepper Motor Control
    Luxury Car Interior Light
    Simply by remote control law circuit diagram
    I2C control interface includes RGB LED Driver circuit



    Top