phone ringtone generator circuit

Posted on Feb 5, 2014

At the same time, pulses obtainable from pin 1 will be of 1. 25 Hz and 20 Hz at pin 14. The three output pins of IC1 are connected to base terminals of transistors T1, T2, and T3 through resistors R1, R2, and R3, respectively. Working with a built-in oscillator-type piezobuzzer generates about 1kHz tone. In this particular circuit, the piezo-buzzer

phone ringtone generator circuit
Click here to download the full size of the above Circuit.

is turned on` and off` at 20 Hz for ring tone sound by transistor T3. 20Hz pulses are obtainable at the collector of transistor T3 for 0. 4-second duration. Just after a time interval of 0. 4 second, 20Hz pulses become again obtainable for another 0. 4-second duration. This is followed by two seconds of nosound interval. Thereafter the pulse pattern repeats by itself.

Leave Comment

characters left:

Related Circuits

  • New Circuits



    Popular Circuits

    Low-Battery Detector
    Two-Wire Intercom
    Basic Oscillator (Tone Generator) At 1.8 KHz -alarm circuits
    AC Ohmmeter ESR Meter Circuit
    tuned sine wave oscillator circuit
    1995 ford ranger wiring diagram
    two transistor led flasher
    Lamp flasher circuit
    GSM Remote Control Gate Control Schematic
    Made with hex inverter DC DC converter circuit
    A volt DC power supply circuit