removable memory card

  
Inside:
Repository
The block diagram below shows how the removable memory card or MMC card connection to other corresponding components. Since the memory card has two signal function operations, the SD mode and SPI mode, the SD mode indicates that all pins of the memory card etherSD card, miniSD cardandmicroSD cardhas a connections while in SPI mode some of the pins are not connected.
removable memory card - schematic

See the block diagram below. In mobile phones ESD and EMI filtering were so very important, the connection between the memory card across to the application processor is being filtered or protected by any means of ESD and EMI interruption. The best easy way to identify which one has SD or SPI designed, is by figuring it out on the schematic diagram, and it is so important to know about this for easy troubleshooting and repair memory card related problem issues. Now, the key reasons in this discussion is also by identifying certain types of ESD-EMI filters being used on every mobile phones designs. Since EMI-ESD filters are most commonly get damaged when it comes to memory card failure problem. In SD mode circuit connection we notice that it`s used an EMI filter with large number of internal filter lines while in SPI mode only a few internal filter lines. By learning how does the removable memory card works on mobile phone devices. We can easily configure on how to repair if something went wrong when the memory card related problems such as memory card can`t be read, memory card not detected and many other related memory card errors on mobile phones occurred. In mobile phones there are three types of removable memory card being used the first was the SDcard which is so big in size used on some old model cell phones and then comes the MiniSD and the latest is the microSD card which the smaller one and commonly used in most...



Leave Comment

characters left:

New Circuits

.