Electronic Circuits Schematics Projects




Modem based on PIC16C620

Rating: 5.00/10 (2Votes cast)

Category: Computer Circuits / Modem Circuits
Views: 953
Rank: 0

No description available. visit page.

Related circuits

Connect a modem to a Basic Stamp

The 2400-bps modem in Figure 1 makes it easy to connect a Basic Stamp (Parallax Inc, www.parallaxinc.com) to a telephone modem. Using this circuit, you can call home via your PC and find out if the house is still there. The Basic Stamp2, BS2-IC, has the necessary programming space, and a 64-kbyte...



Interface for V.34 Modems with DS8933 and DS8934

This application note describes the V.34 Modem Interface and the benefits obtained when the DS8933 and DS8934 Line Drivers and Receivers are employed. The following sections are covered. # V.34 Standard # DS8934 and DS8933 # Async Application # Sync Application # Driver Characteristics #...



KD2BD Pacsat Modem

The KD2BD Pacsat Modem is a low cost, high performance 1200 bps BPSK modem designed to interface between a packet radio terminal node controller (TNC) and an amateur satellite ground station, and allows full-duplex access to the 1200 baud "Pacsat" constellation of amateur satellites.



Modem based on PIC16C620

No description available.



DSL Modem

The red boxes and symbols below represent functions provided by Intersil. Please click them for part numbers and links to parametric tables. Click on the Print Friendly link to view an expanded view of the application.



autodetects baud rate circuit MAX202 and PIC16C54

The popularity and easy access of RS-232 ports lend them to many communication projects. You can use a port as is” or as a tiny parallel port when the exchange uses only control lines. Before the asynchronous serial-data transfer between two devices can take place, you must ensure that both...



Pilot-Modem dialog

1. Because there is no DTR wire (modem pin 20) from Pilot. Pilot can simulate DTR line but this is not used at this moment (needs a pull-up) 2. This way we can not dial without a known dial tone if needed (like in some areas out of USA) 3. There no reason for this setting. Using X4 modem...



LT1886: Low Distortion Line Driver

The LT1886 is a high speed dual power amplifier with excellent high frequency distortion performance. The LT1886 features a 700MHz gain-bandwidth product, 200V/ms slew rate and over 200mA of output current drive in a small SO-8 package. Using only a single 12V supply, the LT1886 is the best...



Interfacing gsm modem with proteus

PIC-based wateralarm with SMS function


Comments




 characters left

Captcha

captchaPlease input letters you see on the image.
Click on image to redraw.



Facebook Comments

Most searched
 
Accounts area
Username:
Password:
Forgot password? Register
Circuits