Electronic Circuits Schematics Projects




TDA1591 PLL stereo decoder

Rating: 8.00/10 (18Votes cast)

Category: Digital Circuits / Decoder Circuits
This circuit is also crossed to: , , PLL Circuits , FM radio , Stereo Circuits
Views: 1669
Rank: 0

The TDA1591 is a monolithic bipolar integrated circuit providing the stereo decoder function and noise blanking for FM car radio applications.Adjustment-free voltage controlled PLL oscillator for ceramic resonator (f = 456 kHz) · Pilot signal dependent mono/stereo switching · Analog control of mono/stereo change over [stereo blend, Stereo Noise Controller (SNC)] · Adjacent channel visit page.

Adjustment-free voltage controlled PLL oscillator for ceramic resonator (f = 456 kHz) · Pilot signal dependent mono/stereo switching · Analog control of mono/stereo change over [stereo blend, Stereo Noise Controller (SNC)] · Adjacent channel http://www.nxp.com/acrobat_download/datasheets/TDA1591_T_CNV_2.pdf

Related circuits

co-decoder fits into 32-macrocell PLD

The decoder`s operation is more complicated than that of the encoder. A behavioral simulation (Figure 2) shows the internal signals that are involved in the decoding process. Note that the spike on the "cd" signal is not a true spike; it appears only in the behavioral simulation and disappears in...



Receive Signal Decoders

The signal output by the radio control receiver is a form of PWM. This may be useful for driving servos, but is inconvenient for general electronic applications. Therefore, several of the circuits on this site convert this signal into a voltage first. This is performed by this circuit. It is not...



Tone-alert decoder

PLL (Ul) is set with R2 to desired tone frequency. LED lights to indicate lock-up of PLL. Reduce signal level (Rl) and readjust R2 to assure lock-up. Delay is selected from counter U3 output. Circuits latches (turns on Q1 to allow audio to speaker) when proper frequency/duration signal is received



7-segment display with encoder

This design explains how to use an encoder to set the number shown by a 7-segment display. Turn the knob clockwise to increment the number, turn it counterclockwise to set it back. Encoders are the most practical (and handy) way to set a large number of digital devices. Think of an alarm clock,...



Digital Encoder with PIC16F57

This encoder can transmit the state of up to 16 TTL digital inputs using an RF or infrared transmitter. When enabled, the included modulator automatically generates the 38kHz IR carrier. Containing a PIC microcontroller, the circuit is very flexible. You can decide which transmitter inputs will...



Rotary encoder with digital potentiometer

The circuit in Figure 1 represents an attempt to combine the best of both worlds: the simplicity of a rotary interface and the performance of a digital potentiometer.



TDM stereo decoder

The circuit shown here with RC filter (Figure T). Micropoco capacitor has a temperature coefficient of 125 10"6 60.10" 6'C" V In simplified circuits a fixed resistor (e g. 620k) can be used for a guaranteed switching level of < l6mV.



Surround Sound Decoder

This is a simple surround sound decoder. Left & right outputs of a stereo tape or CD player can be connected to the circuit inputs and 4 outputs of the circuit can be connected to a surround power amplifier or 2 stereo power amplifier.




Comments




 characters left

Captcha

captchaPlease input letters you see on the image.
Click on image to redraw.



Facebook Comments

Most searched
 
Accounts area
Username:
Password:
Forgot password? Register
Circuits