Square wave oscillator


Posted on Apr 7, 2012

The generators of square pulses, are used in a lot of applications, between which the adjustment of conditions of entry in the digital circuits and the control of amplifiers acoustic frequencies. This circuit is a generator that it produces, in combination with a other generator, sine wave frequencies or square pulses, continuous or interrupted square pulses. Main characteristic the generator it is, that the circle of operation can be regulated so as to he is constituted from until ten interrupted pulse. This pulses are particularly useful for the adjust amplifiers, loudspeaker, rooms of hearings etc.


Square wave oscillator
Click here to download the full size of the above Circuit.

A other qualification of generator are that her pulses have level of report the 0V, without it is used for aim, capacitor in the exit. The absence of capacitor in the exit, has as result the production of clearly square pulses in any frequency of operation. The generator work without perceptible distortion up to their 100KHZ.Her pulses have width 5Vpp (± 2.5V) and cover the needs of all amplifiers acoustic frequencies. In the cases where we needed signal of smaller width, then we can him decrease with the pontesometer RV1. The generator is supplied with ± 5V, provided from two batteries or from one suitable power supply. Placing the S1, in different places from the 1 until 10, (a place each time), the crowd of output pulses, in each circle of operation can be altered from 1 until 10 and the duration of pause, (when the signal is maintained in the level of 0V), from 9 until 0. The waveform [1] -acquaintance as burst - it is particularly benefit for the control of instability low or high frequency circuits. How it works? The circuit of generator that produces the interrupted square pulses and the produced vibrations in various points of circuit, when the selector of switch S1 is (ON), in the place 3, that correspond in exit Q3 of IC2/7. If in entry J1 we apply pulse line, width ± 5V, then these via the S2, enter in the entry of 3 IC1A that is j-k flip-flop as T, with a view to it ensures in the circuits that follow,...




Leave Comment

characters left:

New Circuits

.

 


Popular Circuits

TONE DISPLAY
Heat sensor relay switch
10 Mhz fiberoptic receiver
Pyroelectric Fire Alarm System Diagram
How to make an Astable or Free running Multi vibrator using 741 Op-Amp
integrated circuit How do I control a two 12VDC 10A motors using an Arduino
simple tv audio video transmitter
project Huminator
Signal Generator circuit
valved transmitter for 3.5 MHz
Blackout emergency lights circuit 4



Top