Electronic Circuits Schematics Projects




Voltage InverterII

Rating: 2.00/10 (57Votes cast)

Category: Power Supply Circuits / AC to DC & DC to DC
Views: 495
Rank: 4

This simple and inexpensive circuit can produce a dual (positive and negative) voltage from a single supply input. It is therefore extremely useful for powering opamp and other circuits that require a dual voltage from a single battery. The circuit will operate at an input voltage from around 5V to 20V and produce a output from +-2.5V to +-10V. visit page.

Related circuits

3-30 V/2.5 A Stabilized variable power supply

This is a very useful project for anyone working in electronics. It is a versatile power supply that will solve most of the supply problems arising in the everyday work of any electronics work shop. It covers a wide range of voltages being continuously variable from 30 V down to 3 V. The output...



Charge-pool-power-supply

It is usually desirable to have the remote transmitter of a 4 to 20 mA current loop system powered directly from the transmission line. In some cases, this is not possible because of the high-power requirements set by the remote sensor/transmitter system. In these cases, an alternative to...



Phase Shifter With Eight Outputs Circuit

The circuit consists of eight cascaded identical cells, each ccll being a dc-controlled active phase shifter. Because the dc control is common for all shifters, the circuit is adjusted by trirtuiiing RA so that the phase difference between and Vi is zero. As a result, each shifter will introduce...



High-Voltage Pulse Supply

This high-voltage pulse supply will generate pulses up to 30 kV. Ql and Q2 form a multivibrator in conjunction wi



600 VOLTS POWER SUPPLY FOR QRO

Amateur Radio Transmitters using valves such as 807 or1625 works well with a plate voltage between 600V to 700 Volts.The circuit described here is a full wave voltage doubler. The output voltage is twice the input voltage. For 230V AC input the output will be nearly 600 Volts. Resister R1 is used...



Alarm Power Supply

This Power Supply is suitable for the Modular Burglar Alarm. However, it has other applications. It is designed to provide an output of 12-volts, with a current of up to 1-amp. In the event of mains failure, the back-up battery takes over automatically. When the mains is restored, the battery...



General-purpose-power-supply

The supply 6-66 can be used for supply output voltages from 1 to 35 V. The line transformer should be selected to give about1.4 times the desired output voltage from the positive side of filter capacitor C1 to ground. Potentiometer R2 sets the output voltage to the desired value by adjusting...



30V from 5V converter

I made the power supply which makes about +30V with +5V power supply. The direct current is changed into the alternating current by the oscillator which used the schmitt trigger inverter which has the hysteresis characteristic and the resonance circuit. The high DC voltage (+50V) is made with...



Transistor DC to AC power inverter

Three Phase INVERTER


Comments




 characters left

Captcha

captchaPlease input letters you see on the image.
Click on image to redraw.



Facebook Comments

Most searched
 
Accounts area
Username:
Password:
Forgot password? Register
Circuits