Telephone Line optical and sound Ring


Posted on Mar 4, 2013

It is a relatively simple circuit, with which we can have optical and sound clue, when we have telephone ring in the line of telephone. The calls in the line, are changed in pulses of frequency 400 HZ from the IC2, in exit 3. Then via the IC4, after they are strengthened at two times, they can be drive to the entry of amplifier and a loudspeaker, so that we hear the ring, in what level we want. The desirable level of sound is regulated by the trimmer TR1 that if we want can be replaced with pontesometer. With the led LD1 we have optical clue, of rings. Simultaneously via the IC3 it can become control, exterior circuit, adapted in the needs each virtuous.


Telephone Line optical and sound Ring
Click here to download the full size of the above Circuit.

Part List R1-3-13=4.7Kohm C1-7 =100nF 630V Q1-2 = BC550C R2-11-12 =1Mohm C2=4.7nF 63V MKT IC1-3 =4N35 - CNX38 R4 =1Kohm C3 =220uF 25V IC2=LM555 R5 = 2.2Kohm C4 =33nF 63V MKT IC4 =TL071 R6 = 33Kohm C5 =220nF 63V MKT LD1 =LED 3-5 mm R7 =390Kohm C6 =10uF 25V TR1=10Kohm Trimmer or Pont. R8 =820ohm C8 =47nF 63V MKT CON1 =4 pin connector R9 =22Kohm C9 =100uF 25V CON2 =4 pin connector R10 =1.8Kohm D1-2 =20V 1,3W Zener R14 =10Kohm D3 =1N4002




Leave Comment

characters left:

New Circuits

.

 


Popular Circuits

Feedback Bandpass Filter
sequential led bar graph circuit
FM remote Encoder/Decoder
SH-123 ASIC holiday lights
Discrete components sound and light control stairs delay switch circuit 8



Top