35Watt ICs amplifier with STK4065
The amplifier circuit based on the STK4065 is designed for high-efficiency audio amplification, particularly suited for driving various types of speakers, including subwoofers and full-range systems. The STK4065 is a power amplifier IC that integrates multiple functions, simplifying the design by reducing the number of external components required.
The circuit typically consists of the STK4065 IC, power supply circuitry, input stage, feedback network, and output stage. The power supply section converts the AC mains voltage to a stable DC voltage of 13.5 volts, which is necessary for the operation of the amplifier. The output stage is designed to provide a continuous output power of 35 Watts into an 8-ohm load, ensuring sufficient power for driving speakers in home audio systems or small public address systems.
The input stage of the circuit may include capacitive coupling to filter out any DC offset from the audio source, allowing only the AC audio signal to pass through to the amplifier. Feedback mechanisms are often employed to stabilize gain and improve linearity, ensuring minimal distortion in the amplified signal.
The output stage of the amplifier is designed to handle the power demands of various speaker types, with a focus on maintaining sound quality while delivering adequate volume levels. The 8-ohm output impedance allows compatibility with a wide range of speakers, making this amplifier circuit versatile for different audio applications.
In summary, the STK4065 amplifier circuit represents a robust solution for audio amplification, providing a reliable and efficient means of driving speakers in various configurations while maintaining high sound fidelity.Amplifier circuit using ic STK4065 above that which the amplifier circuit uses only ic, or also could be called this series do not have equality in the use of ic. Power amplifier output power 35Watt supplied with a voltage of 13. 5 volts DC. Impedance of the output is 8 ohms. that can be applied to the speaker subwoofer, woofer, and fullrange. 🔗 External reference
Related Circuits
The AN7147 Dual 5.3-watt Audio Power Amplifier from Panasonic is categorized as a replacement type, indicating its anticipated availability in the market for an extended period. When combined with additional components, it can be configured to create a simple...
This 300W RF power amplifier for an FM transmitter utilizes 2 x TP9383 transistors. It operates within the 88 - 108 MHz frequency band. The 300W RF power amplifier is designed specifically for FM transmission applications, providing high power output...
This amplifier delivers a nominal output power of 140 watts peak envelope power (PEP) when fed with input levels as low as 3 watts. Both the input and output transformers feature a 4:1 turn ratio and a 16:1 impedance...
This design utilizes a well-established circuit topology for the power amplifier, employing a single-rail supply of approximately 60V and capacitor coupling for the speaker(s). The benefits for a guitar amplifier include a straightforward circuit design even at relatively high...
This amplifier circuit utilizes three voltage levels: positive, negative, and ground, with a maximum voltage of approximately 55V DC. The circuit can accommodate several integrated circuits (ICs), including STK 030, 058, 075, 077, 078, 080, 082, 083, 084, and...
China's national conditions indicate that the general living room area exceeds twenty square meters, often serving as a bedroom or listening room. For speakers with a sensitivity of 89 dB or higher, a pure Class A amplifier with a...