Stereo FM transmitter using BA1404


Posted on Feb 6, 2014

A high quality stereo FM transmitter circuit is shown here. The circuit is based on the IC BA1404 from ROHM Semiconductors. BA1404 is a monolithic FM stereo modulator that has built in stereo modulator, FM modulator, RF amplifier circuitries. The FM modulator can be operated from 76 to 108MHz and power supply for the circuit can be anything betwee


Stereo FM transmitter using BA1404
Click here to download the full size of the above Circuit.

n 1. 25 to 3 volts. In the circuit R7, C16, C14 and R6, C15, C13 forms the pre-emphasis network for the right and left channels respectively. This is done for matching the frequency response of the FM transmitter with the FM receiver. Inductor L1 and capacitor C5 is used to set the oscillator frequency. Network C9, C10, R4, R5 improves the channel separation. 38kHz crystal X1 is connected between pins 5 and 6 of the IC. Composite stereo signal is created by the stereo modulator circuit using the 38kHz quartz controlled frequency.




Leave Comment

characters left:

New Circuits

.

 


Popular Circuits

Shortcircuit protected voltage regulator
Water-level-sensor-and-control
Hands-off-intercom
How to make a Simple Infra Red Remote Control Circuit
Extend Timer Range For The 555
picaxe 18X repeater controller
3v fm transmitter for short distance
electromagnetic levitator circuit
Telephone Status Indicator Circuit
Detected line current Phase protective circuit 2



Top