Sound Card Frequency Prescaler
#sound card
#frequency prescaler
#audio processing
#signal conditioning
#frequency divider
#digital audio
#sound modulation
#audio interface
#frequency adjustment
No description available.
ADT70 internal functional block diagram
The ADI I70 is a signal conditioning integrated circuit designed for RTD/PRTD applications, particularly suitable for 1K and 100Ω platinum RTDs (PRTDs). The ADT70 features an integrated instrumentation amplifier, an operational amplifier, a 2.5V reference power supply, and a matching...
Arduino Vocal Effects Box
This Arduino-powered vocal effects box pitch shifts and distorts incoming audio signals to produce a wide variety of vocal effects. This project is an experiment with real-time digital signal processing using Arduino. It samples an incoming microphone signal at a...
Central-image-canceller
The circuit is designed to eliminate the vocal portion of an audio signal while preserving the instrumental portion. It achieves this by mixing two channels that are 180° out of phase, allowing the signals that create the center-stereo image to...
Sound Card Interfacing for RTTY PSK31 and SSTV
The circuit described is recommended for SSTV applications utilizing a sound card connected to a computer. It follows the JVComm style of interface and can also be employed for RTTY and PSK31 applications. Many users modify this circuit to incorporate...
Frequency divider
If the input frequency is known, the timer can be utilized as a frequency divider by adjusting the duration of the timing cycle. The figure illustrates the waveforms of the timer when employed as a divide-by-three circuit. This application leverages...
Signal Conditioning Analog Front-end for Microcontrollers
The I/O board incorporates 16-bit resolution voltage analog inputs and outputs, along with a 4-20mA current loop transmitter and receiver for microcontroller applications. The document discusses amplifier circuits and schematics, including a signal conditioning variable gain amplifier, analog filter, and...
4047/4066 audio slicer
You need to connect pins 1 and 13 of the 4053 to the virtual ground rail (top of C4), not the circuit's 0V rail.
The CD4053 is a triple 2-channel analog multiplexer/demultiplexer integrated circuit, widely used for routing analog signals...
The Xonar Essence STX
The sound experience is described as "organic" and smoother compared to the LME49720 op-amp. The term "musical" is used subjectively, indicating a preference for the dynamics presented. Optimal listening occurs at extra high gain settings. When switching from the LME49720...
Decade frequency divider
In the next stage, the product of R2 and C2 should be ten times that of the preceding stage (±2%). R2 should be between 27K and 10M. Additional components include C1 and C2 with a capacitance of 0.047 µF (±1%),...