16 bit brain wave interface for ArduinoRaspberry Pi
#Arduino
#Raspberry Pi
#brain wave
#16 bit
#interface
#microcontroller
#sensor
#data acquisition
#neural
#EEG
No description available.
ds1307 lcd
How to connect and program the Arduino/Atmega168 microcontroller to an LCD display and DS1307 RTC.
To interface the Arduino/Atmega168 microcontroller with an LCD display and a DS1307 Real-Time Clock (RTC), the following steps outline the necessary connections and programming considerations.
The LCD...
Fun with Arduino
The term Arduino refers to a system of components that includes the board, the microcontroller, the bootloader, and the programming environment. It is designed to simplify the complexities associated with microcontroller programming. At the core of the Arduino board is...
arduino based digital oscilloscope
A digital oscilloscope is being developed using Arduino, designed as an Arduino Shield. The current implementation functions but exhibits signal distortions. A TLV571 chip is utilized in the design.
The project involves creating a digital oscilloscope that can be mounted on...
arduino + optotriac based ac dimmer blinking severely
The light is blinking instead of dimming. A specific software was used to illuminate the bulb without dimming, which includes the following code:
```cpp
unsigned int i = 1;
void setup() {
Serial.begin(9600);
...
communication Multiplex data and LED pin
A chip conversion is being performed for the Sparkfun LED RingCoder. The sample code provided with the product functions effectively on an Arduino UNO, utilizing a separate pin for each input/output—specifically, five pins for the shift registers and six pins...
knight Rider
A light computer has been developed that simulates the scanning effect seen in the KITT car from the TV series Knight Rider. The design utilizes a microcontroller, specifically the PIC16F84A, instead of the commonly used CD4017 counter IC. This choice...
arduino yogurt maker
The crock pot is connected to a relay that can turn it on or off. The relay is controlled by a microcontroller based on readings from a temperature sensor (thermistor) located inside the crock pot. The objective is to heat...
project crystal
This is the initial phase of an Arduino-controlled PWM RGB LED project, which incorporates distance and PIR sensor control along with a sleep mode feature.
The project utilizes an Arduino microcontroller to manage a Pulse Width Modulation (PWM) RGB LED, allowing...
GSM Remote Control 2 IN and 2 OUT Part 2 Schematic
The control of the system is managed by a Microchip PIC18F46K20-I/PT microcontroller, which is programmed with firmware to oversee the activity of the GSM/GPRS module, monitor the logic conditions of two opto-isolated inputs, and send commands to two relays within...