FTDI Circuit Schematic
#FTDI
#USB
#serial communication
#microcontroller
#UART
#interface
#USB-to-serial
#embedded systems
#programming
#debugging
No description available.
MICROCONTROLLER BASED AUTOMATIC ROOM LIGHT CONTROLLER
This project involves an automatic room light controller with a bidirectional visitor counter using a microcontroller. It is designed to manage room lighting and accurately count the number of individuals present. When a person enters the room, the counter increments...
Robot Motor Control Schematic
The schematic for controlling the motors is divided into three main sections, each serving a distinct function. The primary components featured in the schematic include the PIC 18F252 microcontroller, the SN754410 motor driver, and 2N2222 transistors. At the top of...
USB to SPDIF Converter
Is there a source for a schematic for a USB to SPDIF converter, similar to those offered by Empirical Audio? The concept is appealing, but the price of $500 is quite high.
A USB to SPDIF converter is a device that...
microcontroller Generate a reset signal from a falling edge trigger
The microcontroller design features the microcontroller (MCU) in hibernation mode, which can only be awakened by a pulse (high-low-high) signal on the reset pin (active low). An accelerometer or an external real-time clock (RTC) serves as the wake-up source. The...
USB Audio Interface based DAC PCM2902
This weblog discusses electronic circuit schematics, PCB design, DIY kits, and electronic project diagrams. The subject circuit is a quality preamplifier with a built-in USB DAC designed for the Leachamp power amplifier. The schematic is based on the PCM2902 datasheet...
USB to RS232 Using Atmel ATtiny2313 or ATmega8
The Universal Serial Bus (USB) interface has gained immense popularity due to its user-friendly applications, allowing for Plug and Play functionality without the need for system restarts. However, for developers, integrating USB into end systems has proven to be more...
USB Printer Share Switch
This device allows two computers to share a single USB printer or other USB devices, such as an external flash drive, memory card reader, or scanner. A rotary switch is used to select the PC that will use the USB...
Experimental I/O board for microcontrollers
For beginners experiencing similar challenges, a general-purpose I/O board is recommended to minimize prototyping time and maximize space on the breadboard for projects. The construction of this board is straightforward. Basic I/O devices can be soldered onto a general-purpose perforated...
home security system
The fundamental design of this project employs an Atmel AT89S8252-24PC Microcontroller, which features 2KB of EEPROM for runtime data storage. An ADC0838CCN analog-to-digital converter will be utilized to process up to eight inputs from sensor devices, including passive infrared sensors...