Proposal of saturated DC reactor type superconducting fault current limiter (SFCL)
#superconducting
#fault current limiter
#DC reactor
#power system protection
#electrical engineering
#high voltage
#energy efficiency
#grid stability
#cryogenic
#SFCL
No description available.
Electronic Pest Killing Lamp
Working Principle: The circuit, as illustrated in figure 4-187, is composed of three main components: the power circuit, the pulse oscillator, and the high voltage generator. The power circuit includes components S, FU, TI, VD1-VD4, C1, C3, IC1, R1, and...
5000 Volts arc supply
A Very Low Current, High Voltage Spark, that is Manually Triggered. Although its not easily Measured, the Peak Output voltage will be over 5,000 Volts. T1 is a small audio transformer and it steps up the voltage to about 500...
High Voltage Generation For Xenon Tube Applications
Power demand in portable designs can require, in specific applications, more than 1 A. A method involves paralleling two DC to DC converters on the same load instead of using a single higher current converter with a lower switching frequency....
High Voltafe Generator
This is a series regulator with Q900 being the control element, Q901 a driver, and Q902 an error amp. ZD900 forms the emitter reference voltage source. Since the generated high voltage and other voltages are linked by means of the...
12KV High Voltage Generator
The hobby circuit described utilizes a unique method to generate approximately 12,000 volts with a current of about 5 microamperes. It employs two silicon-controlled rectifiers (SCRs) that form two pulse generator circuits. These SCRs discharge a 0.047 microfarad, 400-volt capacitor...
hv dc dc converter
Occasionally, high voltage is necessary for experimenting with traditional vacuum tubes, cold cathode displays, or other circuits that require high voltage (B+) power supplies. There is a method to avoid high voltage for tube circuits by using space charge tubes,...
Ultra high voltage generator
By repetitively charging and discharging a capacitor through the primary winding of an induction coil with high voltage, an ultra-high electromotive force (emf) is induced in the secondary winding. Switching is performed by a triac, which is triggered by a...
High Voltage Dc Generator Circuit
In the miniature high-voltage DC generator, the circuit receives input from a 12 V DC power supply, which is amplified to produce a 10,000 V DC output. This process induces a pulsating signal of opposite polarity in the secondary winding...
High Voltage Power Supply for Geiger Tubes
These power supply circuits generate 500 volts, but they can be modified to supply several hundred to nearly 1000 volts by changing the zener diodes. These circuits produce high voltages and can cause dangerous shocks. Caution is advised; these devices...