versatile dc dc converter
#DC-DC converter
#voltage conversion
#power electronics
#step-up
#step-down
#buck-boost
#switching regulator
#energy efficient
#portable power
#adjustable output
No description available.
12vdc to 37v dc converter
12VDC to 37V DC converter using SG3524.
The circuit described is a DC to DC converter designed to convert an input voltage of 12V DC to an output voltage ranging from 0V to 37V DC. This circuit utilizes the SG3524 integrated...
voltage conversion circuit composed of NJM4558
Figure 1-42 (a) is a voltage/current conversion circuit that converts a 0-10V input voltage into a 4-20mA output current. Adjusting resistor RP2 can set the input voltage (Ui) to 0V, resulting in an output current (I) of 20mA; similarly, setting...
+5V + 12V boost power supply MAX761
The circuit depicted in the figure illustrates an efficient, low-power step-up DC-DC converter, the MAX761, along with a few external components, which functions as a +5V to +12V boost power supply. Its characteristics include a conversion efficiency of 86% and...
Regulated Charge Pump
The DC-DC converter replaces a voltage tripler for the external inductor and diode typically associated with the switching regulator, IC1. Inverting and non-inverting amplifiers in the MOSFET driver (IC2) activate a diode-capacitor tripling network (D1 through D3, C1 through C3)....
12V DC to 85V DC Converter
The circuit below is a DC to DC converter using a standard 12 VAC center tapped power transformer wired as a blocking oscillator. The circuit is not very efficient but will produce a high voltage usable for low power applications....
200mA Buck-Boost Synchronous DC/DC Converters
The LTC3531, LTC3531-3.3, and LTC3531-3 are synchronous buck-boost DC/DC converters that function with input voltages that can be above, below, or equal to the output voltage. The topology utilized in these integrated circuits (ICs) enables continuous power transfer across all...
Step up Voltage converter DC to DC
A simple DC to DC step-up voltage converter circuit schematic using the LM2700, which is a step-up switching converter.
The LM2700 is a versatile step-up switching converter designed to efficiently convert a lower input voltage to a higher output voltage. This...
Simple 12V to 24V DC DC converter using LM324 and transistor
A simple 12V to 24V DC-DC converter circuit diagram built around the LM324. This boost converter schematic can provide up to 800mA output current and a steady 24V DC.
The described circuit utilizes the LM324 operational amplifier as the core component...
3A Dc-Dc Converter Needs No Heatsink Circuit
This regulator achieves 90% efficiency with a 12-V input and a 5-V output. It utilizes the LT1158 and LT1431 components from Linear Technology, Inc. High efficiency is accomplished by synchronously switching two power MOSFETs in a step-down switching regulator. The...