8051 microcontroller ISP Programmer for AT89S51/52 series
#8051
#AT89S51
#AT89S52
#ISP programmer
#microcontroller programming
#flash memory
#in-system programming
#hex file upload
#AVR
#embedded systems
No description available.
Ranco ETC-211000 uses AVR Atmega16L8
The Ranco ETC-211000 utilizes an Atmega16L8 microcontroller. The chip comes with initial protection, necessitating an erasure before any code development can occur. The design has significant flaws, potentially ranking among the worst encountered during reverse engineering efforts, which span over...
AirBorn Electronics project
Embedded system design engineers create examples of their work from the 1990s era.
Embedded systems have evolved significantly since the 1990s, and the design work from that period reflects the technological limitations and innovations of the time. Engineers in this field...
AVR programming tool with graphical user interface
AVRtools features an intuitive graphical user interface and utilizes predefined function blocks. It provides a wide array of basic functions, including timers, counters, logic operations, and analog signal processing. Additionally, it includes function blocks for sending SMS messages over the...
Rangkaian Thermometer Berbasis Mikrokontroler AT89S52
This circuit features a microcontroller AT89S52 paired with a 12-bit ADC LTC1298. The programs are written in C and include digital filtering, interfacing with a 0.5-inch 7-segment LED display. The thermometer provides a sensitivity of 0.1°C. The hardware block and...
8051 flash programmer
In certain scenarios, a portion of application code may be stored in the Flash/EPROM version of the 8031 microcontroller, while the remaining code resides in an external EPROM, particularly in expanded systems. The introduction of the 8051 Programmer serves as...
mc programmer
The Flash MC Programmer II is a rapid parallel port programmer designed for various 40-pin 8051 microcontrollers.
The Flash MC Programmer II employs a parallel port interface to facilitate high-speed programming of 40-pin 8051 microcontrollers. This device is particularly advantageous for...
Drive relay with AVR microcontroller
To drive a relay, a current greater than 20mA is required, which cannot be supplied by a single microcontroller pin. Therefore, a relay cannot be connected directly to a microcontroller pin. Instead, a simple amplifier circuit consisting of a single...
AVR High Voltage Programmer Using Arduino
The project explains how to create a simple AVR High Voltage Programmer using Arduino. It can be utilized to fix or recover incorrectly fused AVR chips.
The AVR High Voltage Programmer is designed to reprogram AVR microcontrollers that have been inadvertently...
AVR
The article "Creating a Line Follower Robot with AVR" serves as a continuation of a previous piece on line follower robots, focusing on the AVR ATMega8535 and the associated block diagram. In the first part of this series, titled "Creating...