Engine Data Logging STM32
#STM32
#data logging
#engine monitoring
#sensors
#automotive
#embedded systems
#CAN bus
#telemetry
#real-time data
#diagnostics
No description available.
Automotive burglar alarm
The alarm activates after a 13-second delay and remains active for 1 to 1.5 minutes before automatically resetting. It can also be deactivated and reset by opening and reclosing switch SI.
The described circuit functions as a delay-triggered alarm system, incorporating...
Telemetry demodulator
The circuit recovers an FM audio signal that varies from less than 1 kHz to about 10 kHz.
The circuit is designed to demodulate frequency-modulated (FM) audio signals within the frequency range of less than 1 kHz to approximately 10 kHz....
MidiMotor2 Module
The logic power and CAN signals enter through pins 3 to 8 of connector N4. These CAN signals are routed to the MCP2551 CAN physical layer integrated circuit (IC), designated as U5. The transmit and receive pins of the microcontroller...
Downlink Project Description
The Skeyeball project is an ongoing initiative within the Indiana University System Design Methods Laboratory, aimed at providing graduate and undergraduate students with opportunities to engage in embedded system design and implement various projects. The downlink segment of the project...
Automotive Electrical Tester
This compact tester is designed for checking vehicle electrical circuits. Two LEDs indicate whether one of the clips is connected to the positive supply line (red) or to ground (green). The unit is powered by the vehicle battery. It is...
microcontroller driving a relay with transistor and Opto-isolator
Controlling a relay with an STM32 microcontroller involves using a 4N33 opto-isolator for electrical isolation. The relay coil requires approximately 250 mA, necessitating the use of an MPS222 transistor for switching. The GPIO configuration inverts the logic when used as...
remote field recorders automated frog call data loggers
Automated frog call data loggers have been effectively utilized to gather information on: (1) species presence during sampling, enabling the reliable recording of species that may be overlooked due to time constraints; (2) life history and phenology details, such as...
The Remote Controlling Circuit
The design of this project relies heavily on sensors, which are present in both the control module and the robot. The computer analyzes the signals from these sensors to determine appropriate output actions. The control unit utilizes potentiometers as its...
TTL pulse recording for fMRI data collection
This web page outlines the installation and usage of ezlog data logging software. This software enables the measurement of the timing of various events, facilitating synchronization of different stimuli. Specifically, the software is designed to provide a detailed report on...