10-100kHz sine-wave oscillator
#sine-wave
#oscillator
#frequency generator
#10-100kHz
#signal generator
#waveform
#electronic oscillator
#low distortion
#precision oscillator
#audio frequency
No description available.
Metal detector circuit diagram 6
The metal detector circuit consists of several key components including the probe oscillator, reference oscillator, oscillation signal processor, mixing amplifier, and ammeter PA. The probe oscillator is made up of the oscillating tube VI, exploration coil L1, capacitors C1 to...
automatic dual output display circuit diagram
This circuit lights up ten bulbs sequentially, first in one direction and then in the opposite direction, creating an appealing visual effect. In this circuit, gates N1 and N2 form an oscillator. The output of this oscillator serves as a...
oscillator
An oscillator is a circuit that generates a frequency source such as a sine wave, square wave, or pulse train. It combines a frequency-sensitive circuit, like an LC circuit or a crystal, with a negative resistance typically provided by an...
Metal detector circuit diagram 8
The metal detector circuit consists of a probe oscillator, a PLL (phase-locked loop) circuit, and an audio alarm circuit. The probe oscillator includes a detection coil (L), transistor (V1), and several resistors (R1 to R3) and capacitors (C1 to C5)....
Simple-touchtonetm-generator
The oscillator utilizes a Motorola MC14410CP chip paired with a 1-MHz crystal. This configuration generates both high and low audio tones, which are then transmitted to the amplifier through 1 kΩ resistors and a 1 µF capacitor. The output resistors...
Oscillator without a crystal
Is it possible to build an oscillator (VCO or not) without using a crystal? I built a Pixie II with a borrowed crystal, which I have since returned, and now I am inquiring about the feasibility of constructing an oscillator...
Sonic Defender
This oscillator-driver produces a loud sound of approximately 3 kHz, modulated with a 10-Hz warble. BZ1 is a Matsushita EFB-RP3. U1A generates the 10-Hz waveform that modulates the 3-kHz tone produced by U1C and U1D. Q1 drives the transducer through...
Code practice oscillator II
Oscillator, operates with 2 to 12 volts DC (optimal performance is achieved at 9 to 12 volts for maximum volume and clear keying). Additionally, R1 can be substituted with a 500K potentiometer, allowing the circuit to sweep across the entire...
Inductance feedback oscillator circuit
A feedback oscillator circuit utilizing inductance is presented, featuring the 3DG3 transistor. The component parameters reference values include: 1) transistors 3DG6, 2) resistances R1 at 91 kΩ, R2 at 11 kΩ, and R3 unspecified, 3) capacitance values of C at...