ATA5423 ATA5423 UHF Transceiver For ASK And FSK Systems 315 MHz
Description: The ATA5743 is a multi-chip PLL receiver device housed in an SSO20 package. It has been specifically designed to meet the requirements of low-cost RF data transmission systems, supporting data rates ranging from 1 kBaud to 10 kBaud using Manchester or Bi-phase coding. The receiver is optimally paired with Atmel's PLL RF Transmitter U2741B. Its primary applications include telemetering, security technology, and keyless entry systems. It operates within a receiving frequency range of 300 MHz to 450 MHz for ASK or FSK data transmission. The information provided pertains specifically to applications at 433.92 MHz and 315 MHz, as stated by Atmel Corporation.
The ATA5743 PLL receiver is a sophisticated component tailored for efficient data transmission in various RF applications. The device’s architecture is designed to handle modulation schemes such as Amplitude Shift Keying (ASK) and Frequency Shift Keying (FSK), which are critical for reliable communication in environments where cost-effectiveness is paramount.
Operating within the frequency range of 300 MHz to 450 MHz, the ATA5743 is versatile and can be employed in multiple applications, particularly in telemetering systems where data is transmitted over distances without physical connections. The integration with Atmel's PLL RF Transmitter U2741B enhances its functionality, allowing for seamless communication between transmitting and receiving units.
The device's ability to support data rates from 1 kBaud to 10 kBaud makes it suitable for various low-bandwidth applications, ensuring that it can efficiently transmit the necessary data for security systems and keyless entry mechanisms. The choice of Manchester or Bi-phase coding further contributes to its robustness against noise, making it ideal for use in environments where signal integrity is critical.
In terms of design, the SSO20 package allows for compact integration into various electronic systems, facilitating the development of small form-factor devices that still require reliable RF communication capabilities. The specifications and performance characteristics of the ATA5743 make it a valuable component for engineers and designers working in the field of RF communications, particularly in applications that demand both reliability and cost efficiency.The ATA5743 is a multi-chip PLL receiver device supplied in an SSO20 package. It has been especially developed for the demands of RF low-cost data transmission sys- tems with data rates from 1 kBaud to 10 kBaud in Manchester or Bi-phase code. The receiver is well suited to operate with Atmel`s PLL Rf Transmitter U2741B. Its main applications are i n the areas of telemetering, security technology, and keyless-entry systems. It CAN be used in the frequency receiving range of f = 300 MHz to 450 MHz 0 for ASK or FSK data transmission. All the statements made below refer to 433. 92 MHz and 315 MHz applications. By ATMEL Corporation
The load described here is capable of handling up to 10 watts of RF power for a couple of minutes and is designed for the widely used 50 ohms impedance. It consists of ten parallel connected 560 ohms 1 watt...
This circuitry offers some features that are highly desirable when building a QRP (or ANY) transceiver. It also includes a combination of features that many might not always take the time to include in their projects. Considerable effort has been...
This 860 MHz Phase Locked Loop (PLL) oscillator circuit is designed for a 1200 MHz transverter's local oscillator with 435 MHz rigs. The oscillator utilizes Toshiba PLL synthesizer integrated circuits (ICs). The TC9122P serves as a preset counter for determining...
This simple AM circuit utilizes a 561B. It lacks an inductance/capacitance tuning circuit, as the 365 pF capacitor connected between pins 2 and 3 is responsible for all tuning. A good external antenna and a solid ground connection are required...
The schematic is very simple and includes, in addition to Nutchip, with its three driving transistor and LED, the radio receiver. The data come from the OUT pin of the receiver and enter the pin REMOTE remote control. The RESET...
This is the circuit diagram of an audio/video modulator. The circuit converts audio and video signals into a UHF TV signal, allowing a video signal from a camera or other source to be connected to a standard TV set. The...
This is a low-cost, antenna-mounted UHF TV pre-amplifier circuit that can provide more than 25 dB of gain. The first stage of the pre-amplifier is biased for optimum gain. L1 and L2 are strip line equivalents with a length of...
Automatic antenna switching or RF power indication can be achieved with this circuit. Relay will key with less than 150 mW drive on 2 m.
The circuit designed for automatic antenna switching or RF power indication utilizes a relay that is...
This is a circuit for Closed-Loop Automatic Power Control for RF Applications. The circuit utilizes a log detector (AD8318) and a variable gain amplifier (VGA) (ADL5330).
The Closed-Loop Automatic Power Control (APC) circuit is designed to maintain a consistent output power...
We use cookies to enhance your experience, analyze traffic, and (if you allow) serve personalized ads.
By clicking Accept All, you agree to our use of cookies.
Learn more