Three phase square-wave output generator

This circuit provides a three-phase square-wave output suitable for a variable speed motor drive. The operation is simple, as the 4017 counter is synchronously reset after six clock pulses. The outputs are combined to produce the necessary waveforms. It is noteworthy that while NOR gates are depicted in the schematic, OR gates will yield a similar outcome. Additionally, the circuit can be expanded, as illustrated in Fig. 2, to generate pseudo-sine waves if desired, although this will complicate the circuit design.

The described circuit utilizes a 4017 decade counter, which is a popular choice for generating sequential outputs. The counter is designed to count from zero to six and then reset, providing a sequence of outputs that can be combined to form the three-phase square-wave signal. The square waves produced have equal amplitude and a phase difference of 120 degrees, which is essential for driving three-phase motors efficiently.

The outputs from the 4017 can be fed into a combination of logic gates, specifically NOR or OR gates, to shape the final waveforms. The choice between NOR and OR gates depends on the specific requirements of the application, as both can achieve comparable results in generating the desired output waveforms.

To extend the functionality of the circuit, the introduction of additional components can allow for the generation of pseudo-sine waves. This modification involves using filters or additional logic to smooth the square-wave outputs, creating a waveform that more closely resembles a sine wave. While this can enhance the performance of the motor drive in terms of reducing harmonic distortion, it also adds complexity to the design, necessitating careful consideration of component values and configurations.

In summary, this circuit is a versatile solution for generating three-phase square waves for motor control, with the potential for further enhancements to produce pseudo-sine waves, albeit at the cost of increased circuit complexity.This circuit gives a 3 phase square-wave output for a variable speed motor drive. Operation is straightforward, the 4017 counter is synchronously reset after six clock inputs. The she outputs are combined to give the required waveforms. It is interesting to note that although NOR gates are shown, OR gates will give effectively the same result. The circuit can be extended as shown in Fig. 2 to give pseudo-sine waves if that is required, but that will diminish the simplicity of the circuit. 🔗 External reference