Positive High-Voltage Hot Swap Controller with Power Limiter
The positive high-voltage hot swap controller circuit is designed to safely connect and disconnect loads to a high-voltage power supply without causing disruptions or damage to the system. The TPS2491 and TPS2490 are integrated circuits specifically engineered for this purpose, providing robust performance in high-voltage environments.
The key function of this circuit is to manage inrush current when connecting a load, thereby protecting both the load and the power source. The controller achieves this by gradually ramping up the output voltage, which limits the inrush current to a safe level. This is particularly crucial in applications where large capacitive loads are present, as they can draw significant current upon connection.
The power limiter feature is an essential aspect of this design, as it prevents excessive current from flowing through the load, which could lead to overheating or damage. The TPS2491 and TPS2490 include built-in current sensing capabilities, allowing for real-time monitoring and control of the output current. If the current exceeds a predetermined threshold, the controller can take action, such as reducing the output voltage or disconnecting the load entirely, to protect the system.
In addition to current limiting, the hot swap controller circuit incorporates fault detection mechanisms. These mechanisms can identify conditions such as overcurrent, overtemperature, and under-voltage, allowing for quick response and system protection. The integration of these features makes the TPS2491 and TPS2490 highly suitable for applications in telecommunications, industrial automation, and power management systems where reliability and safety are paramount.
Overall, the positive high-voltage hot swap controller circuit with power limiter is a critical component in modern electronic systems, ensuring safe operation and longevity of both power supplies and connected loads.This is Positive High-Voltage Hot Swap Controller circuit with Power Limiter. This circuit uses the TPS2491 or TPS2490 because both of them have some. 🔗 External reference
Related Circuits
This LM338-based power supply can deliver approximately two outputs of 12 to 36 volts at 5 amps each (10 amps in version 2 of this power supply, which includes transistors to increase the current capacity). The design utilizes two...
It is important to note that there is limited protection circuitry and fuses in this amplifier. A short turn-on delay for the output power supply is included to minimize thumps, along with a couple of line fuses, but no...
Fast rise-time high-voltage pulses have various applications, including EMC testing and device characterization. The circuit outlined here is a simple, cost-effective solution designed for the latter purpose. It can generate pulses ranging from 0 to 1000 V with currents...
This discrete voltage regulator features capabilities equivalent to modern voltage regulator integrated circuits (ICs). While constructing a discrete version may not be cost-effective, studying the schematic diagram provides valuable insights into its operation. The circuit includes a resistor of...
This indicator lets you see how much power an amplifier produces. The circuit uses an LM 3915, the logarithmic variation of the known IC LED VU Meter LM 3914. The circuit is connected directly to the speaker output of...
An LM386 audio power IC is configured as a feedback oscillator. It can operate with a supply voltage ranging from 6 to 12 V. The circuit is capable of driving a loudspeaker. The LM386 is a low-voltage audio power amplifier...