auxillary fuse lighter fuse burned out

The provided information includes a fuse block diagram with the Auxiliary Power (Aux Pwr) fuse highlighted. It is advisable to check both sides of the fuse using a test light or multimeter to ensure functionality. It is assumed that power has been verified at the Aux Power socket, specifically at the center pin, and that power is absent. Caution is advised to ensure that the ground side is not the source of the issue before pursuing a power problem.

In electronic systems, the fuse block serves as a crucial component for protecting circuits from overcurrent conditions. The Auxiliary Power (Aux Pwr) fuse is specifically designed to safeguard auxiliary devices that require power from the vehicle's electrical system. The fuse block typically consists of multiple fuses, each corresponding to different circuits within the system.

To assess the functionality of the Aux Pwr fuse, a multimeter or test light should be employed. The procedure involves checking for voltage on both sides of the fuse. A reading of voltage on one side and not on the other indicates a blown fuse, which should be replaced to restore functionality. In the absence of voltage at the Aux Power socket, particularly at the center pin, further investigation is warranted.

It is essential to verify that the ground connection is intact, as a faulty ground can lead to similar symptoms as a power failure. Testing the ground side can be accomplished by measuring the voltage at the ground terminal relative to a known good ground point. If the ground is compromised, it may prevent the proper operation of devices relying on the Aux Pwr circuit.

In summary, when diagnosing issues related to the Auxiliary Power circuit, it is critical to systematically verify both power and ground connections to isolate the source of the problem effectively. This approach ensures that all potential fault conditions are considered before making any repairs or replacements.Here is the fuse block diagram, with the Aux Pwr fuse highlighted. I would check both sides of the fuse with a test light or multimeter to make sure it is working at that point. I am assuming that you have checked for power at the Aux Power socket - center pin - and power is NOT there.

I wouldn`t want to be going after a power issue when the ground side might be bad. Ask-a-doc Web sites: If you`ve got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers. Justanswer. com. Traffic on JustAnswer rose 14 percent. and had nearly 400, 000 page views in 30 days. inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent. 🔗 External reference