Ceramic Resonators


Posted on Feb 6, 2014

The feedback resistor determines the bias of the oscillation circuit. Generally, C-MOS IC uses 100k ohms to 10M ohms (normally, 1M ohms) feedback resistance, while TTL IC uses 1k ohms to 10k ohms (normally, 4. 7k ohms) feedback resistance because of low I/O impedance. If the feedback resistance is too large, the amount of feedback will be reduced,


Ceramic Resonators
Click here to download the full size of the above Circuit.

making the operating point unstable. If the feedback resistance is too small, the gain will be reduced, or the current will be increased (Recently, most ICs intgrates the feedback resistor). Damping resistor and loading capacitors work as low-passfilter that can suppress abnormal harmonic oscillation by reducing the gain in the high frequency range. Also, the IC gain can be limited and CERALOCK ® properly match IC, unwanted ringing, overshoot and undershoot can be suppressed. In the kHz band, the damping resistance should be several kilo-ohms, and in the MHz band, it should be between tens ohms and hundreds ohms. The damping resistor is optional. This parameter is the most important for determining the stability of the oscillation circuit. If the load capacitance is too small, the oscillating waveform will be distorted, resulting in unstable oscillation. If it is too large, oscillation may stop. When compared with the same IC, the oscillation circuit providing lower frequency needs larger capacitance. When the IC gain is too high, or when TTL or triple-stage buffered IC is used, the bias resistor can be used to change the bias point intentionally in order to reduce the IC gain or suppress unstable oscillation. C-MOS IC uses a bias resistor of 1M ohms to 10M ohms, while TTL uses a bias resistor of several kilo-ohms to 10 kilo-ohms. A ceramic capacitor with excellent frequency characteristics is most suitable as a loading...




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    4W FM Transmitter with 2N2219
    Baby watch Intercom Circuit
    Universal-battery-charger
    Crystal-timebase
    Positive-regulator-with-pnp-boost
    Voltage-To-Frequency Converter I
    audio Can I use a PNP Transistor with an Electret Microphone to get an non-inverting output for my Arduino
    hacking rfid for fun
    Low Cost Analog to Digital circuit
    Relay type starting circuit diagram
    Radio harmonic detection circuit



    Top