SMOKE DETECTOR USING 555 TIMER


Posted on Feb 4, 2014

I am presenting you a simple smoke sensing alarm circuit using 555 timer. By using this circuit you can detect smoke and it alarms when the air is contaminated. Let me introduce you the components used in it. This smoke detecting alarm is based directly on an astable multivibrator and sensor (Photo interrupter module). The sensing module trig


SMOKE DETECTOR USING 555 TIMER
Click here to download the full size of the above Circuit.

gers the oscillator and generates an alarm through the loud speaker. The photo interrupter module consists of an LED and a Photo transistor. The light coming from the led falls directly onto the photo transistor, this makes the collector terminal to go ground potential and activates the reset control of 555 timer. If there is an interrupt on the path of LED and Photo transistor as smoke, the light doesn`t reaches the transistor causing the collector voltage approximately equal to supply voltage and it is fed directly to the reset pin of NE555, which is wired as astable multivibrator. The high voltage at this pin enables the ic and it produce square waves continuously, which in turn drives the speaker through a coupling capacitor. Here the astable multivibrator is configured as AF oscillator with a frequency of 379Hz, so as to hear the alarm through Loud speaker.




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    Signal Tracer
    Cosimulation with Analog-RF Systems
    simple thermocouple amplifier
    NTC protection circuit three-phase asynchronous motors
    Stable amplification 1001 times chopper amplifier
    A circuit of a pyroelectric infrared switch application BISS0001
    1Hz clock signal generator circuit
    Constituted by the ISO113 0 ~ 20mA current loop isolation drive circuit diagram



    Top