LCD Frequency Counter Using PIC
#PIC
#frequency counter
#LCD
#microcontroller
#signal measurement
#electronics
#digital display
#frequency measurement
#embedded systems
#sensor interface
No description available.
LCD contrast controlled by LCD
What is the recommended frequency for the Low Pass Filter used to control the contrast of an LCD? I want to adjust the contrast of an LCD using PWM.
To effectively control the contrast of an LCD using Pulse Width Modulation...
lcd
The most commonly used LCDs available in the market today include 1 Line, 2 Line, or 4 Line configurations, which utilize a single controller and can display a maximum of 80 characters. LCDs that support more than 80 characters employ...
Eight-digit-microprocessor-display
The display interface utilizes the ICM7218A/B in conjunction with an 8048 family microcontroller. An 8-bit data bus (DBO/DB7-IDO/ID7) facilitates the transfer of control and data information to the 7218 display interface during successive WRITE pulses. The mode input pins on...
Universal PIC-EEPROM programmer
This is a JENS MADSEN project I've built to program my PIC and EEPROM (16xXXX AND 12CXXX AND 24CXX). I use it with IC-Prog; it is little, simple to build, cheap, and gives few bugs. More: When I built it,...
Power supplies for microcontroller based projects
This document discusses the use of small microcontrollers, such as those from the PIC and Atmel series, which typically operate at 5V and require less than 100mA for complete system functionality. Some PICs can function at lower voltages, such as...
JDM pic programmer help required
For the following circuit of the JDM PIC microcontroller programmer, information is needed regarding the PIC microcontroller pins that receive the RS232 signals.
The JDM PIC microcontroller programmer is a widely used circuit for programming PIC microcontrollers via the RS232 interface....
A typical liquid crystal display inverter circuit OZ965
A typical liquid crystal display inverter circuit (OZ965) is primarily controlled by the OZ965 chip. It includes a driving field effect transistor (U2), a step-up transformer, the backlight socket, and associated circuitry. A 5V DC voltage is provided by the...
Precision frequency counter tachometer
Precision frequency counter/tachometer. The ICM7207A provides a 1-second gating window along with the store and reset signals. The display reads hertz directly. When pin 11 of the ICM7207A is connected to V+, the gating time will be 0.1 seconds, resulting...
Multitasking Pins
It is entirely logical that low-cost miniature microcontrollers have fewer pins than their larger counterparts, sometimes too few. Consideration has been given to how to economize on pins by making them perform multiple functions. One approach is to exploit the...