DG509A Schematic for Monolithic Cmos Analog Multiplexers
Not rated
16,707
Maxim's DG508A and DG509A are monolithic CMOS analog multiplexers. The DG508A is a single 8-channel (1-of-8) multiplexer, while the DG509A is a differential 4-channel (2-of-8) multiplexer. Both devices guarantee high performance and reliability.
The DG508A and DG509A analog multiplexers are designed to facilitate the routing of multiple analog signals through a single output channel. The DG508A, as an 8-channel multiplexer, allows selection of one of eight input signals to be directed to the output, making it suitable for applications requiring signal selection from multiple sources. The device features low on-resistance and low power consumption, which enhances its efficiency in battery-operated devices.
The DG509A, on the other hand, functions as a differential multiplexer, allowing for the selection of one of four differential input pairs. This capability is particularly advantageous in applications that require high signal integrity and noise rejection, as it can effectively minimize common-mode noise and improve the overall quality of the output signal.
Both multiplexers are constructed using complementary metal-oxide-semiconductor (CMOS) technology, which contributes to their low power requirements and high noise immunity. The devices are typically used in communication systems, data acquisition systems, and instrumentation, where precise signal routing and switching are crucial.
In terms of pin configuration, the DG508A and DG509A include control pins for selecting the desired channel, as well as power supply connections. The control logic is straightforward, allowing for easy integration into existing circuit designs. These multiplexers also feature a wide operating voltage range, making them versatile components for various electronic applications.
Overall, the DG508A and DG509A analog multiplexers from Maxim are reliable and efficient solutions for managing multiple analog signals in complex electronic systems. Their robust design and performance characteristics make them ideal for a wide range of applications in both consumer and industrial electronics.Maxim s DG508A and DG509A are monolithic CMOS Analog Multiplexers (muxes): the DG508A is a single 8-channel (1-of-8) mux, and the DG509A is a differential 4-channel (2-of-8) mux. Both devices guarant.. 🔗 External reference
A few modifications have been made to the dead band and pulse stretcher resistors, and the position feedback potentiometer has been altered to function as a "zero the speed" or "center your transmitter sticks." Additionally, a traditional PNP-NPN H-bridge...
This metal detector circuit needs to be powered using a 9 volts power supply (DC) or a 9 volts battery. The C1 capacitor is a variable capacitor with a value of 365 pF, C2 is a 100 pF silver...
The overall block diagram of the system shows that audio input enters from the left and undergoes various processing steps including summation, differencing, multiplication, delay, and filtering. The output consists of five discrete audio channels along with one low-frequency...
The wire speed DC motor consistently receives approximately 20 volts, irrespective of the switch position on the nozzle handle. The switch has been tested with an ohmmeter and functions properly. Even after disconnecting the switch from the circuit board,...
The trip point is set halfway between the supplies by R1 and R2; R3 provides over 200 mV of hysteresis to increase noise immunity. The maximum frequency of operation is about 300 kHz. If response to TTL levels is...
The LM4992 stereo audio power amplifier can be utilized to design a straightforward audio power amplifier project suitable for portable electronic devices. This amplifier circuit is capable of delivering 1 watt of continuous average power per channel to an...
Warning: include(partials/cookie-banner.php): Failed to open stream: Permission denied in /var/www/html/nextgr/view-circuit.php on line 713
Warning: include(): Failed opening 'partials/cookie-banner.php' for inclusion (include_path='.:/usr/share/php') in /var/www/html/nextgr/view-circuit.php on line 713