Thermometer using DS1621 and Nokia 3310 LCD interfaced with ATmega8
The circuit design involves integrating the DS1621 temperature sensor with a Nokia 3310 LCD to create a digital thermometer. The DS1621 is a digital temperature sensor that communicates via the I2C interface, making it suitable for microcontroller applications. The sensor can measure temperatures ranging from -55°C to +125°C with a resolution of 0.5°C, providing accurate readings for various applications.
To begin the design, the DS1621 is connected to a microcontroller, which serves as the central processing unit of the thermometer. The microcontroller should have I2C capability to facilitate communication with the DS1621. The typical connections include the VCC pin of the DS1621 to the power supply (usually 3.3V or 5V), the GND pin to the ground, and the SDA and SCL pins connected to the corresponding I2C data and clock lines of the microcontroller.
The Nokia 3310 LCD, which operates on a serial interface, is used to display the temperature readings. The microcontroller reads the temperature data from the DS1621 and processes it to convert the digital value into a human-readable format. The microcontroller then sends this formatted data to the LCD for display. The LCD requires a power supply, and its data pins must be connected to the microcontroller's GPIO pins.
In addition to the basic connections, decoupling capacitors may be placed near the power pins of both the DS1621 and the Nokia 3310 LCD to filter out noise and ensure stable operation. Pull-up resistors are also necessary on the SDA and SCL lines to maintain proper signal levels for the I2C communication.
The software implementation involves initializing the I2C communication, configuring the DS1621 for continuous temperature measurement, and periodically reading the temperature data. The microcontroller should handle any necessary conversions and display the temperature on the Nokia 3310 LCD in a clear and concise manner.
Overall, this project demonstrates the effective use of the DS1621 temperature sensor in conjunction with the Nokia 3310 LCD to create a functional and visually accessible thermometer.I am presenting one application with the Nokia 3310 LCD: Designing a thermometer using DS1621 temperature sensor IC. DS1621 is 8-pin sensor from Maxim, with. 🔗 External reference
Related Circuits
This circuit is a simple analog multiplier. The operation of the circuit can be understood by considering A2 as a controlled gain amplifier. It involves components such as an analog multiplier, a log-antilog circuit, and a summing junction, along...
The following schematic illustrates a Crystal Radio Receiver Circuit Diagram that incorporates audio frequency (AF) amplification utilizing a Germanium transistor. The inclusion of AF amplification enhances the audio output quality. The Crystal Radio Receiver Circuit is a simple yet effective...
This is a simple digital thermometer utilizing an Atmel AVR microprocessor, capable of measuring temperatures in the range of 2 to 99 °C with a resolution of 1 °C. The circuit is managed by an Atmel AVR ATmega8, ATmega8L,...
This article describes a 2-Input alarm developed on the PIC LICK-1 Module using a Microchip PIC16F628-04. The program uses the internal 4MHz oscillator and if any other frequency is used, the timer values will need to be changed. A...
This circuit utilizes a CMOS 4017 decade counter to generate a sequence of four distinct events, with the capability to expand the sequence to nine or ten events. Each event's duration is independently controlled. The inclusion of D13 allows...
This article discusses the creation of a digital thermometer using the Arduino Uno. The temperature sensor employed is the LM35DZ, although it can be substituted with other sensors like the DS18B20. The sensor detects temperature and sends the data...