4 Channel 433MHz Wireless RF Remote Control Kit 200m
The 4 Channel 433MHz Wireless RF Remote Control Kit is designed to facilitate wireless communication between a remote transmitter and multiple receiver modules. Operating at a frequency of 433MHz, this kit is suitable for various applications, including home automation, security systems, and remote control of electronic devices.
The kit typically consists of a handheld remote control unit with four buttons, each corresponding to a separate channel. Each button can be programmed to control a specific device or function, allowing for flexible operation. The remote sends a coded signal via RF waves to the receiver, which is connected to the device being controlled. The range of 200 meters allows for operation over considerable distances, making it ideal for both indoor and outdoor applications.
The receiver module is equipped with a microcontroller that interprets the incoming RF signal and activates the corresponding output channel. This output can be connected to various devices, such as lights, motors, or alarms, enabling users to control them wirelessly. The system may also include features such as adjustable sensitivity, power-saving modes, and the ability to add additional channels or receivers to expand functionality.
Installation of the kit typically requires minimal technical expertise, as the components are designed for easy integration into existing systems. Power requirements are generally low, with both the remote and receiver operating on standard batteries, ensuring convenience and ease of use.
In summary, the 4 Channel 433MHz Wireless RF Remote Control Kit represents a practical solution for wireless control applications, combining a robust range, ease of use, and versatility in device compatibility.4 Channel 433MHz Wireless RF Remote Control Kit 200m. RF remote control provides long range of up to 200m / 650ft and can find many uses for controlling different devices.. 🔗 External reference
Related Circuits
The circuit of an FM Tracking Transmitter Circuit or Remote Control Transmitter Circuit is explained using a 555 IC and 2N4392 transistors. The FM Tracking Transmitter Circuit utilizes a 555 timer integrated circuit (IC) configured in astable mode to generate...
Diode D1 and resistor R1 provide VDD isolation during the programming of 24-pin devices. The jumper J3 must be shorted for 24-pin device programming and left open for 28-pin device programming. The following EEPROMs are pin-compatible with their EPROM...
Neural networks are a broad topic. This example demonstrates how to create a basic neural sensor that takes resistive readings from multiple sensors, multiplies them by a weight factor, and then sums the results. The results are compared to...
The schematic below illustrates four methods of controlling a relay with a digital logic signal. Figure A can be used in most cases where the relay coil requires 100 mA or less and the input current is 2 milliamps...
This article is about a software controlled, parallel port-interfacing 8-channel Pulse-Width-Modulated fan controller. I'll admit that the electronic part of it isn't very advanced, but hopefully the idea of "interfacing" might be interesting. My old partner and I were working...
The controller circuit is designed to reduce a fan's noise, power consumption, and wear, especially when operating in low, fluctuating ambient temperatures. A temperature sensor is mounted in the fan's airstream, allowing the circuit to adjust the fan speed...