Car Water Temperature
The described circuit is designed to monitor the water temperature in a vehicle's cooling system, providing a visual representation of the temperature using a seven-segment display. The primary components include the CA3161 integrated circuit, which functions as both a counter and a driver for the seven-segment display, enabling the conversion of temperature readings into a digital format that can be easily interpreted by the driver.
The temperature sensing element is a 1N4148 diode, chosen for its temperature-dependent forward voltage drop characteristics. This diode is strategically positioned near the car radiator to ensure accurate readings of the coolant temperature. The change in voltage across the diode correlates to the temperature, allowing the CA3161 to process this information and drive the display accordingly.
Power for the circuit is derived from the car's battery, typically providing a voltage of approximately 12V. To regulate this voltage down to a stable 5V required for the CA3161 and other components, an LM7805 voltage regulator is employed. This linear voltage regulator is known for its reliability and low-cost implementation, ensuring that the circuit operates within the specified voltage range.
The overall design emphasizes simplicity and efficiency, making it suitable for automotive applications where accurate temperature monitoring is critical for engine performance and safety. The integration of these components results in a straightforward yet effective solution for real-time temperature monitoring in vehicles.The circuit measures the car water temperature. CA3161 is a counter and 7segment driver to display amount of temperature on 7segments. The temperature sensor is a diode, 1N4148. This is set near of the Car Radiator. To obtain the 5 V power supply from Car Battery, you can use a LM7805, +5V low cost voltage regulator. 🔗 External reference
Related Circuits
The circuit described is recommended for SSTV applications utilizing a sound card connected to a computer. It follows the JVComm style of interface and can also be employed for RTTY and PSK31 applications. Many users modify this circuit to...
A temperature-controlled pulse-width-modulator (PWM) boost converter circuit diagram is illustrated in the following figure. This boost converter is designed to operate a 12V fan using a 5V supply while maintaining temperature control. The temperature-controlled PWM boost converter circuit operates by...
This schematic outlines a straightforward electronic project for designing a water level indicator circuit. It employs a 7-segment display to represent water levels in a tank as low, half, and full, indicated by the letters L, H, and F,...
A continuously working wiper in a car may prove to be a nuisance, especially when it is not raining heavily. By using the circuit described here one can vary the sweeping rate of the wiper from once a second...
A thermistor placed in the specified position creates a heat-activated sensor. Variations in temperature will modify the output of the operational amplifier (op-amp), activating the relay and illuminating the LED. Interchanging the positions of the thermistor and the 47k...
The circuit diagram of the device features a 555 timer IC configured as a transmitter and a receiver, divided into two sections. The 555 timer in the transmitter section serves as the core component of a frequency oscillator. The...