Multi-piece HL402 application example in the switching power supply system
The HL402 switching power supply system is designed to efficiently drive multiple IGBT (Insulated Gate Bipolar Transistor) modules, which are crucial in high-power applications due to their ability to handle high voltage and current levels. The system comprises four distinct sections, each responsible for driving an individual IGBT, ensuring that the overall performance is optimized for various load conditions.
The SG3526 integrated circuit is employed as a pulse width modulation (PWM) controller, generating the necessary drive pulses for the IGBTs. This PWM control is essential for regulating the output voltage and current, allowing for precise control over the power delivered to the load. The SG3526 can operate in various modes, including voltage regulation and current limiting, making it versatile for different applications.
The HL component acts as a current sensor, monitoring the output current of the power supply. It is an essential part of the protection mechanism, as it detects overcurrent conditions that could potentially damage the IGBTs or the load. When an overcurrent condition is detected, the system can take corrective actions, such as reducing the PWM duty cycle or shutting down the power supply to prevent damage.
Additionally, the system incorporates short circuit protection, which is critical for safeguarding both the power supply and the load during fault conditions. This feature ensures that the system can respond rapidly to short circuits, minimizing potential damage and enhancing overall reliability.
In summary, the HL402 switching power supply system is a robust and efficient solution for driving IGBT modules, integrating advanced features for performance optimization and protection against overcurrent and short circuit conditions.Applications are given to complete the four-piece HL402 switching power supply system diagram system drive four power IGBT switching power supply system. FIG IGBT drive pulse i s generated by the SG3526, HL for the current sensor, which is used to carry the line over current fault protection, short circuit,
Related Circuits
This 10-watt, 144-MHz power amplifier utilizes a TRW PT5757 transistor. The inductor LI consists of 4 turns of no. 20 enameled wire with a 3/32" inner diameter, while inductor L2 comprises 10 turns of no. 20 enameled wire with...
It is based on a Philips class-H audio amplifier integrated circuit and can deliver 36W RMS or 70W music power, all from a 13.8V supply. The new Mighty Midget Amplifier can produce approximately 36W RMS continuously into a 4-ohm...
Voltage is transformed by the transformer turns ratio N2/N1. For instance, if a 20VAC secondary voltage is required with a 120VAC input, a 6:1 ratio would be needed. When full load current is drawn from the secondary winding, the...
Note for bridge configuration: 1. Install jumpers JU2 and JU4. 2. Remove J1. 3. Remove RIO. 4. Replace R13 with a jumper wire. 5. Replace R15 with a 4.53 kΩ, 1% resistor. 6. Replace R14 with a 13 kΩ,...
An increasing number of devices operate on internal rechargeable batteries. While a compatible charger is typically included, some devices can only be charged via a USB port. This is common with USB MP3 players, which require docking with a...
A DC power supply can be designed using high voltage transistors to provide an adjustable supply voltage ranging from 10 to 300 volts, which can be modified with potentiometer P1. Transformers used in these power supplies typically feature multiple...