TS4962 3W Filter-free Class D Audio Power Amplifier With Active Low Standby Mode
16,021
TS4962 3W Filter-free Class D Audio Power Amplifier With Active Low Standby Mode
Stationary - MOPLL & Silicon Tuner TUA6020 2 Band TV Tuner Mixer-Oscillator-PLL with balanced IF-Amplifier. The TUA6020 device integrates a digitally programmable Phase Locked Loop (PLL) with a mixer-oscillator block that includes two balanced mixers and oscillators suitable for use in TV and VCR tuners. The PLL block features four selectable chip addresses.
The PLL, equipped with a 4 MHz quartz crystal, enables precise frequency setting of the tuner oscillator up to 1024 MHz in increments of 31.25, 50, 62.5, or 166.7 kHz. The tuning process is managed by a microprocessor via an I2C bus. The device includes three output ports, and a flag is activated when the loop is locked, which can be read by the processor through the I2C bus. This device is produced by Infineon Technologies Corporation.
The TUA6020 is a sophisticated component designed for high-performance television and video cassette recorder applications. Its architecture includes a digitally controlled PLL that ensures accurate frequency tuning, essential for receiving broadcast signals effectively. The inclusion of balanced mixers enhances the linearity and reduces noise, resulting in improved signal quality.
The PLL's ability to operate with a 4 MHz quartz crystal allows for fine-tuning capabilities across a wide frequency range, making it adaptable for various broadcasting standards. The programmable nature of the PLL, controlled via a microprocessor, provides flexibility in tuning operations, allowing for dynamic adjustments based on the specific requirements of the incoming signals.
The integration of the I2C bus facilitates communication between the TUA6020 and the microprocessor, enabling efficient control and monitoring of the tuner operation. The three output ports provide access to essential status indicators and processed signals, enhancing the overall functionality of the tuning system. The loop lock flag serves as a critical feedback mechanism, ensuring that the system only operates when a stable signal is detected, thus optimizing performance and reliability.
Overall, the TUA6020 represents a robust solution for modern television and video applications, combining advanced tuning technology with user-friendly programmability.Stationary - MOPLL & Silicon Tuner TUA6020 2 Band TV Tuner Mixer-Oscillator-PLL with balanced IF-Amplifier The TUA6020 device combines a digitally programmable Phase locked loop (PLL), with a mixer-oscillator block including two balanced mixers and oscilla- tors for use in TV and VCR Tuners The PLL block with four selectable chip addresses forms a digitally programma- ble Phase locked loop With a 4 MHz quartz crystal, the PLL permits precise set- ting of the frequency of the Tuner Oscillator up to 1024 MHz in increments of 31. 25, 50, 62. 5 or 166. 7 kHz. The tuning process is controlled by a micropro- 2 cessor via an I C bus. The device has three output ports. A flag is set when the 2 loop is locked. It CAN be read by the processor via the I C bus. By Infineon Technologies Corporation 🔗 External reference
This circuit detects the AC audio voltage supplied to car radio loudspeakers and visually represents it as power using an LED bar graph, creating an appealing visual effect. It is designed to accommodate typical car radio output power ranges...
The circuit consists of a relaxation oscillator created by Q1 and an SCR flip-flop formed by Q2 and Q3. When the supply voltage is applied to the circuit, the timing capacitor C1 charges to the firing point of the...
No setup is required: if correct values are used for resistors R3 to R7, LED D1 will illuminate at 0 dB input (0.775V RMS), LED D2 at +5 dB input (1.378V RMS), and LED D3 at +10 dB (2.451V...
Building a headphone amplifier is like building a power amp - only the current demand is just a little bit lower (about a factor 100). Various designs can be found in the internet, and it is relatively easy to...
A project is being developed involving GSM technology, with the objective of detecting key presses on the remote side during an active call. An attempt is being made to utilize a DTMF decoder circuit connected to the speaker output;...
In a single difference amplifier configuration, the AM-427 demonstrates excellent common-mode rejection and low noise voltage, which is primarily influenced by the resistor Johnson noise. The three-amplifier configuration presented circumvents the low input-impedance characteristics typical of difference amplifiers. Due...
We use cookies to enhance your experience, analyze traffic, and serve personalized ads.
By clicking "Accept", you agree to our use of cookies.
Learn more