Wireless FM Transmitter
The wireless FM transmitter operates by converting audio signals into radio frequency signals that can be broadcast over FM radio waves. The device typically consists of a microphone for audio input, an oscillator circuit to generate the carrier frequency, and an amplifier to boost the signal strength before transmission.
The microphone captures sound waves, which are then converted into electrical signals. These signals are fed into the oscillator, which modulates the audio signal onto a specific frequency within the FM band, typically between 88 MHz and 108 MHz. The modulated signal is then amplified to ensure it can be transmitted over a greater distance.
A key component of the transmitter is the antenna, which radiates the modulated signal into the surrounding environment. The size and design of the antenna can significantly affect the transmission range and quality. The transmitter may also include a tuning mechanism, allowing users to select the desired frequency for broadcasting, ensuring that it does not interfere with existing FM radio stations.
In terms of power supply, the FM transmitter may operate on batteries or an external power source, providing flexibility in its application. The compact design of the device, as indicated by its comparison with the pocket radio and yellow disk, makes it portable and convenient for various uses, such as personal broadcasting, public announcements, or even educational purposes.
Overall, the wireless FM transmitter is a versatile device that enables real-time audio transmission, making it a valuable tool for communication in various settings.Wireless FM Transmitter. The photo shows a wireless FM transmitter, pocket radio and yellow disk for size comparisons. Speak into the transmitter and others hear you on any FM. 🔗 External reference
Related Circuits
The page is about equipping an Atmel AVR microcontroller based system with a Prism WLAN interface. This document is intended for people that already have experiences with the AVR microcontrollers and teaches them how to add a cheap but...
Using an NE567 as a tone oscillator, this circuit produces an infrared (IR) signal from the LED, which is modulated with a square wave. LED1 is an IR-emitting LED. The modulation enhances performance under high ambient light conditions. The circuit...
Tom Au-Yeung and Wilson Tang from Maxim Integrated Products describe a method to create a wireless temperature monitoring system using two integrated circuits (ICs). This system can be designed utilizing a local temperature sensor along with an amplitude-shift-keying (ASK)...
This is an anti-theft alarm with wireless connectivity, referred to as the Anti-Theft Car Wireless Alarm. The FM radio-controlled anti-theft alarm can be utilized with any vehicle that operates on a 6 to 12-volt DC supply system. The mini...
This FM transmitter circuit employs four radio frequency stages: a VHF oscillator built around the transistor BF494 (T1), a preamplifier constructed with the transistor BF200 (T2), a driver using the transistor 2N2219 (T3), and a power amplifier based on...
Its an adaptation of the 2X 16 LCD project, by adding a ferrite loop antenna, two resistors, and a capacitor. Here the display shows the output of the 10 bit scanning voltmeter with Minimum Mass Wireless Coupler. Both the...