Car subwoofer filter


Posted on Feb 7, 2014

Here is the circuit diagram of a simple subwoofer filter that can be operated from a 12V DC supply. Such a circuit is very useful in automobile subwoofer applications. The circuit is nothing but a low pass filter whose pass frequency can be adjusted between 60 to 160 Hz. The circuit is designed around the TL072 dual BIFET opamp IC. Out of the two


Car subwoofer filter
Click here to download the full size of the above Circuit.

opamps inside the chip, IC1A is wired as a buffer. The left and right audio inputs after mixing is fed to the input of the IC1A using the DPDT switch S1. Switch S1 is the phase control switch which can be used to make the subwoofer in phase with other speakers. When S1 is in position 2, 180 degree phase shift will be induced. POT R7 can be used for controlling the level. IC1B forms the low pass filter whose pass frequency can be controlled by adjusting the dual gang POT R13.




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    Automatic Room light Controller with Visitor Counter (AT89S52)
    Switching Power Supply
    pseudo track occupancy detector
    How to Control Electronic Circuits Using a Computer and the BASIC Programming Language
    Power Amplifiers Audio Circuits
    autonomous mobile robot capable of avoiding obstacles circuit
    100kHz-30MHz active antenna circuit diagram



    Top