Short-Range Sonar with the BS2!


Posted on Feb 6, 2014

This project is best suited for use as a sensor on a robot. This circuit will actually allow you to measure distances from an object. It measures in a `unit` and it`s range is about 10 inches. As the receiver and transmitter, you will use an ultrasonic transmitter and receiver pair tuned to 40khz (see parts list below. ) The circuit is very easy to


Short-Range Sonar with the BS2!
Click here to download the full size of the above Circuit.

build, and you can build it on whatever you have laying around. I assembled it onto a Radio Shack pre-etched circuit board - and it only took up about an inch and a half square. Please note that the `Free Stamp Pin` in the schematics refer to the basic stamp i/o port that you connect that part of the circuit to. You will need to look out for the the three (! FREE STAMP PIN ` ` !)`s in the code, and change the X`s that accompany them to the correct i/o port number. Download the source code by




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    Cut Phone Line Detector
    Coil-less FM Transmitter
    Temperature measurement using two cables
    5800 Xpressmusic LCD Screen Display Problem Repair Procedure
    200W MOSFET Power Amplifier Schematic Diagram
    ?» The stepper motor driver Creative Works of Tom McGuire
    sine wave generator circuit
    Computer Microphone
    Proximity Sensor-based Remote Control Remote Control Demonstrator Board
    Off Line Telephone Tester
    Inductive Electronic Oscillator Circuit
    PIC-based circuit example from Westford MicroSystems repeater for GPS data and battery voltage monitor
    Gas stove flame alarm circuit
    CIC2851E refrigerator closed remind schematic
    Secret Ethernet optical wireless communication drive circuit diagram



    Top