Stabilized 3V Voltage Source/Reference
The LM10 is a precision voltage reference and regulator integrated circuit designed to maintain a stable output voltage across varying load conditions and input voltages. It operates efficiently in low voltage and low current applications, making it suitable for powering sensitive electronic devices.
The circuit typically consists of the LM10 IC, input and output capacitors, and a few passive components to stabilize the performance. The input voltage is applied to the LM10, which internally regulates it to produce a desired output voltage. The output voltage can be set using external resistors connected to the feedback pin of the LM10, allowing for customization to meet specific application requirements.
In addition to its voltage regulation capabilities, the LM10 features low temperature drift and excellent line and load regulation, making it ideal for precision applications. The output voltage can be designed to be in the range of 1.2V to 37V, depending on the configuration of the external components.
For optimal performance, it is recommended to use bypass capacitors at the input and output to filter out noise and ensure stability. The circuit can be implemented on a printed circuit board (PCB) layout, ensuring proper grounding and minimizing parasitic inductance, which can affect performance.
Overall, the LM10 circuit serves as a reliable voltage source or reference in various electronic applications, providing stability and precision in low voltage environments.This LM10 circuit can be used as low voltage low current voltage source or reference. This circuit regulate the voltage from the power supply to give a very.. 🔗 External reference
Related Circuits
A voltage-controlled oscillator is an oscillator whose frequency of oscillation can be varied by changing an applied voltage. A voltage-controlled oscillator (VCO) is an essential component in various electronic systems, particularly in communication devices, signal processing, and modulation applications. The...
The SC9256 is a phase-locked loop (PLL) integrated circuit designed for digital tuning systems (DTS), featuring built-in 2 modulus prescalers. All functions are controlled through three serial bus lines. These integrated circuits are utilized to configure high-performance digital tuning...
Most ohmmeters of the design shown in the previous section utilize a battery of relatively low voltage, usually nine volts or less. This is adequate for measuring resistances under several mega-ohms (MΩ), but when extremely high resistances need to...
Fully illustrated and schematized plans for a high-performance, easy-to-build transistorized high voltage flyback driver. The high voltage flyback driver circuit is designed to efficiently convert low voltage DC into high voltage pulses suitable for driving flyback transformers. The circuit typically...
This circuit utilizes a type 741 operational amplifier (op amp) configured as a voltage comparator. One input of the 741 is connected to a reference voltage, sourced from a 12-V battery, via a resistor voltage divider. The voltage at...
This device is designed to be a simple, inexpensive comparator intended for use in a solar cell power supply setup where a quick "too low" or "just right" voltage indicator is needed. The circuit consists of one 5V regulator,...