ve7gc popcorn rf preamplifier circuit

This is a simple VE7GC Popcorn RF preamplifier designed by Dick Pattinson. The circuit features a single tuned circuit at the input stage, allowing direct connection to a mixer or product detector in a straightforward receiver project. Adjustable RF gain control is included in this circuit, as demonstrated in the Wee Willy project on this webpage. If Tak Lee green 10.7 MHz IF coils are unavailable, any other brand of 10.7 MHz slug-tuned IF transformer can be used. The Mouser catalog number for a suitable transformer is 421F123. If the 10.7 MHz IF coil has a built-in capacitor at the base, it should be removed. Alternatively, a fixed inductor can be wound using a powdered iron toroid core, with part or all of the C1 capacitance designed to be variable. The input impedance of the circuit is 50 ohms, while the output impedance is low due to the Q2 emitter follower stage. A power supply providing 12V is required to operate this circuit.

The VE7GC Popcorn RF preamplifier circuit is designed to enhance weak radio frequency signals before they are processed by subsequent stages in a receiver. This preamplifier employs a single tuned circuit, which is critical for selecting the desired frequency while rejecting unwanted signals. The inclusion of adjustable RF gain control allows the user to optimize the amplification based on the specific signal conditions and requirements of the application.

When constructing the circuit, if the specified Tak Lee green 10.7 MHz IF coils are not available, alternative brands of slug-tuned transformers can be utilized without compromising performance. The Mouser catalog number 421F123 provides a reliable option for sourcing a compatible transformer. It is important to note that if the selected transformer has an integrated capacitor, it must be removed to ensure proper circuit function.

For those wishing to customize the circuit further, a fixed inductor can be fabricated using a powdered iron toroid core. This approach allows for flexibility in tuning, as part or all of the capacitance associated with C1 can be made variable, enabling fine-tuning of the circuit's resonant frequency.

The input impedance of 50 ohms is standard for RF applications, ensuring compatibility with most RF sources, while the low output impedance provided by the emitter follower stage (Q2) facilitates efficient signal transfer to subsequent stages of the receiver. The circuit requires a 12V power supply, which is essential for its operation. Overall, this preamplifier circuit is a versatile and effective solution for enhancing RF signals in various receiver designs.Right here is definitely an simple VE7GC Popcorn RF preamplifier by Dick Pattinson. The circuit utilizes a single tuned circuit at the front end and can connect straight to a mixer or product detector in a simple receiver project. Note how Dick provided adjustable RF gain control for this circuit in his Wee Willy project on this web page.

In case you can not get Tak Lee green 10. 7 MHz IF coils, most likely any other brand of 10. 7 MHz slug tuned IF transformer would do the job. The Mouser catalog number is 421F123. In case your 10. 7 MHz IF coil has a built in capacitor at the base, take it out. A fixed inductor may also be wound applying a powdered iron torroid core and then all or a portion of the C1 capacity would be designed variable. The input impedance is 50 ohms and the output impedance is low because of the Q2 emitter follower stage.

The power supply with voltage of 12V is needed to operate this circuit. 🔗 External reference