3V-30V/3A Adjustable Regulated Power Supply
The adjustable power supply circuit is designed to provide a stable output voltage that can be varied between 3V and 30V, making it suitable for a wide range of electronic applications. The circuit typically employs a linear voltage regulator or a switching regulator, depending on the efficiency requirements and thermal management considerations.
Key components of the circuit include a transformer (if using a linear design), a rectifier to convert AC to DC, and a voltage regulation stage that can include components such as operational amplifiers, potentiometers for voltage adjustment, and feedback loops for stability. The output stage may also include capacitors to smooth the output voltage and reduce ripple.
Incorporating short circuit protection is essential to safeguard the circuit and connected loads. This can be achieved through the use of fuses, circuit breakers, or electronic current limiting techniques. Overload protection is similarly crucial and can be implemented using current sensing resistors and comparator circuits that disconnect the output when excessive current is detected.
The design should also consider thermal management, as components may generate heat under load. Heat sinks or thermal cutoffs may be integrated to prevent thermal runaway and ensure reliable operation.
Overall, this adjustable power supply circuit is a versatile tool for powering various electronic devices, providing both flexibility in voltage output and safety features to protect the circuit and its loads.This is an adjustable and regulated power supply with 3V to 30V output voltage and supply up to 3A direct current. This circuit featured with short circuit protection and overload protection. Download the manual of this circuit include the.. 🔗 External reference
Related Circuits
FGDF-3 is a three-phase low-temperature iron plating power commutation control switch and electronic circuit. The KGDF-3 serves as a low-temperature iron plating power supply device, incorporating the characteristics of a single-phase low-temperature iron plating power supply. This design facilitates...
The flash beam can be utilized to power remote control devices for AC power applications. A key feature of this device is its memory function, which allows it to supply power continuously. Upon the second activation, the power will...
This circuit generates clean logic pulses with minimal current consumption. It is designed to produce short 2 ms pulses at a frequency of one pulse per second, drawing only 1 microamp from a 9-volt battery. The described circuit operates efficiently by...
The objective of this project was to monitor power consumption in a residential setting. In addition to tracking total usage, the goal was to separately monitor and compare the usage of major appliances, such as the water heater, heat...
The input attenuator uses a commutating capacitor to cancel the input capacitance of the FET buffer (see DC-10 MHz amp schematic). The commutating capacitors are absolutely necessary to cancel the effect of the input capacitance to the DC-10MHz amplifier....
A compact and portable 12V solar power inverter circuit designed to provide illumination. This proven design converts 12V DC from a storage battery. This 12V solar power inverter circuit is engineered to transform direct current (DC) from a solar battery...