60 watt audio amplifier

Using the STK4038X audio amplifier IC, can be designed a very simple high power and efficiency audio power amplifier. This circuit is manufactured by Sanyo Corporation and will provide an output power of 60 watts on an 8 ohms load or 4 ohms load with 0.008% distortion. The output power that is provided by this audio IC can be more higher, but with more distortion.

If you will use an 8 ohms load you must power this audio amplifier project from a dual +/- 40 volts DC power supply and if you’ll use a 4 ohms load you must power this audio project from a dual +/- 33.5 volts DC power source. To prevent overheating, the STK4038X audio power IC must be heatsinked on a good heatsink. Also, you must use a very well filtered power supply (a 10000uF capacitor will be fine for this audio project).

The STK4038X audio amplifier is a high-performance integrated circuit designed for audio amplification applications. This IC is capable of delivering a significant output power of 60 watts into an 8-ohm load, making it suitable for driving speakers in various audio systems. The amplifier operates with a very low total harmonic distortion (THD) of 0.008%, ensuring high fidelity sound reproduction.

For optimal performance, the amplifier requires a dual power supply. When using an 8-ohm load, a dual +/- 40 volts DC power supply is recommended. This voltage level allows the amplifier to achieve its maximum output power while maintaining low distortion levels. Conversely, when driving a 4-ohm load, a slightly lower dual power supply voltage of +/- 33.5 volts DC is necessary, as lower impedance loads demand more current.

Thermal management is critical for the STK4038X, as it can generate substantial heat during operation. Therefore, it is essential to mount the IC on a suitable heatsink to dissipate heat effectively and prevent thermal shutdown or damage. The choice of heatsink should be based on the expected power dissipation and the ambient temperature conditions of the installation environment.

Additionally, the power supply used for the amplifier must be well-filtered to ensure stable operation. A large capacitor, such as a 10,000µF electrolytic capacitor, is recommended to smooth out voltage fluctuations and provide a stable DC voltage to the amplifier. This capacitor should be connected close to the power supply pins of the amplifier IC to minimize voltage drops and ensure reliable performance.

In summary, the STK4038X audio amplifier IC is a versatile and efficient solution for high-power audio amplification, suitable for various applications when properly powered and thermally managed.Using the STK4038X audio amplifier IC, can be designed a very simple high power and efficiency audio power amplifier . This circuit is manufactured by Sanyo Corporation and will provide a output power of 60 watts on a 8 ohms load or 4 ohms load with 0.008% distortion .

The output power that is provided by this audio IC , can be more higher , but with more distortion. If you will use a 8 ohms load you must power this audio amplifier project from a dual +/- 40 volts DC power supply and if you’ll use a 4 ohms load you must power this audio project form a dual +/- 33.5 volts DC power source. To prevent over heating the STK4038X audio power IC must be heatsinked on a good heatsink . Also you must use a very well filtered power supply ( a 10000uF capacitor will be fine for this audio project) .

🔗 External reference