SINGLE CHIP DIGITAL VOLTMETER


Posted on Feb 7, 2014

This 4 1/2-digit DVM circuit is built around a Maxim ICL7129ACPL A/D converter and LCD driver. An ICL8069 CCZR 1. 2-V band-gap reference diode is used for a voltage reference. S2a-b-c select one of four ranges up to 200 V (maximum). The meter also has a piezoelectric buzzer for continuity testing. S3 selects either DVM or continuity. Crystal 1 can


SINGLE CHIP DIGITAL VOLTMETER
Click here to download the full size of the above Circuit.

be changed to 100 kHz if maximum rejection of 50 Hz is desired. The crystal normally provides 120 kHz for best 60-Hz rejection. This is caused by the dual-slope conversion technique used in IC1.




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    Sequential flasher
    Hi-fi-expander-with-de-emphasis
    Loop Antenna For 3.5 Mhz
    200mA per Hour 12V NiCAD Battery Charger circuit
    booster radio fm schematic circuit
    Dual Axis Stepper Motor Controller
    Dtmf Generator At90s4414
    1996 GL1500 modulators interfering with audio
    LM386 Audio Amplifier Chip
    Talking Toy
    Parallel port programming



    Top