TDA2030 8w Amplifier


Posted on Feb 6, 2014

Although the TDA2030 is capable of delivering 20 watts of audio power, I deliberately reduced the output to about 8 watts to drive 10 watt speakers. This is more than adequate for a smaller room. Input sensitivity is 200mV. Higher input levels naturally will give greater output, but no distortion should be heard. The gain is set by the 47k and 1. 5


TDA2030 8w Amplifier
Click here to download the full size of the above Circuit.

k resistors. The TDA2030 IC is affordable and makes a good replacement amplifier for low to medium audio power systems. Incidentally, it is speaker efficiency that determines how "loud" the sound is. Speaker efficiency or sound pressure level (SPL) is usually quoted in dB/meter. A speaker with an SPL of 97dB/m will sound louder than a speaker with an SPL of 95dB/m.




Leave Comment

characters left:

Related Circuits

  • New Circuits

    .

     


    Popular Circuits

    High-q-notch-filter
    classic led flasher circuit
    Dynamo Frequency Monitor
    15W FM RF Amplifier with 2SC2539
    Inverted 555 Timer Circuit
    Motorola Mitrek conversion to repeater or link
    Arms single-phase rectifier bridge rectifier circuit
    TV by the photosensitive resistor circuit diagram automatic brightness adjustment
    Radio harmonic detection circuit



    Top