led night light lamp circuit

This is a simple LED night light circuit that can serve as a room night lamp. The circuit is straightforward and can be constructed with a few components. It employs four LEDs to function as a night lamp. Users can choose blue, white, or any other color for the LEDs. The circuit incorporates 1N4007 diodes to rectify AC voltages to DC, and a 12V zener diode is utilized to step down the voltage to 12 volts, allowing safe operation of the 3-volt LEDs. Capacitor C2 acts as a filter capacitor, and any nearby value capacitor can also be used in this application. Caution is advised while assembling this circuit, as it operates on AC voltage. It is recommended to enclose the completed circuit in a small plastic box. Note: Many points in the circuit are at AC mains voltage, which can pose a lethal shock risk if proper precautions are not taken. Individuals unfamiliar with working with AC line voltages should exercise extreme care.

This LED night light circuit is designed to provide a low-power illumination solution for indoor environments. The configuration consists of four LEDs arranged in parallel, ensuring adequate brightness while maintaining low current draw. The choice of LED color can be tailored to personal preference, with blue and white being popular options due to their visibility and aesthetic appeal.

The 1N4007 diodes serve a critical role in the circuit by converting the alternating current (AC) from the mains supply into direct current (DC). This conversion is essential for the safe operation of the LEDs, which are rated for low-voltage DC. The inclusion of a 12V zener diode is a strategic decision to regulate the voltage supplied to the LEDs, preventing damage from over-voltage conditions. The zener diode clamps the voltage to a safe level, ensuring that the 3-volt LEDs receive the appropriate voltage for optimal performance.

Capacitor C2 functions as a filter capacitor, smoothing out any ripples in the DC output resulting from the rectification process. This helps maintain a stable voltage supply to the LEDs, enhancing their longevity and reliability. While a specific capacitance value is not mandated, it is advisable to use a capacitor with a voltage rating higher than 12 volts to ensure safe operation.

Given that the circuit is connected to AC mains voltage, safety is paramount. Proper insulation and housing are critical to prevent accidental contact with live components. Enclosing the circuit in a plastic box not only protects the user from electric shock but also safeguards the components from environmental factors. It is crucial to ensure that all connections are secure and insulated to minimize the risk of short circuits or electrical hazards.

In conclusion, this LED night light circuit is an efficient and customizable solution for ambient lighting. However, it is essential to adhere to safety guidelines when working with AC voltages to prevent accidents and ensure reliable operation.Here is a simple LED night light circuit which can be used as a room night lamp. The circuit is simple and can be built with few components. The circuit is using four LEDs to perform as a night lamp. You can use blue or white colour LEDs or any other colour you like. 1N4007 diodes are used in the circuit to rectify the AC voltages to DC and the z ener diode of 12V is used to step down the voltage to 12 volts to safely operate the 3 volt LEDs. The capacitor C2 is working as a filter capacitor in the circuit and any near by value capacitor will also work here. Care must be taken to build this circuit because this is a AC circuit. Fit the circuit in a small plastic box when completed. Note: Many of its points are at AC mains voltage. It could give you lethal shock if you are not careful. If you don`t know much about working with AC line voltages 🔗 External reference