LED Stroboscope with EG1951-ND

The rotary switch is available for $5.00USD as of 2003 from DigiKey under part number EG1951-ND or EG1952-ND. It is a real pain to operate this circuit without a proper switch. You can put multiple 4017 ring counters in series to reduce the duty cycle in order to obtain a more focused strobe image but you will have to increase LED current to maintain the same level of brightness and that will shorten LED life. This circuit can be improved a bit by using a more stable STROBE RATE oscillator or by using a regulator to power the oscillator and associated logic. If you do this you should switch to 74HC class devices.

The rotary switch mentioned serves as a crucial component for manual control in various electronic circuits, particularly in applications requiring multiple operational modes or settings. The pricing and availability from DigiKey under specific part numbers indicate a reliable source for procurement. The use of 4017 ring counters in series allows for the manipulation of duty cycles, which is essential for applications such as strobe lighting where precise timing is critical for achieving a focused strobe image.

When implementing a circuit with multiple 4017 counters, it is important to consider the implications of increased LED current. While this adjustment may maintain brightness levels, it can also lead to a reduced lifespan of the LEDs due to thermal stress and overcurrent conditions. Therefore, careful selection of resistors in series with the LEDs is necessary to balance brightness and longevity.

To enhance the performance of the circuit, integrating a more stable STROBE RATE oscillator can significantly improve timing accuracy and consistency. This oscillator can be powered by a voltage regulator, ensuring that the supply voltage remains constant despite variations in input voltage or load conditions. The use of 74HC series devices is recommended for their improved speed and lower power consumption compared to standard TTL logic devices. This transition can lead to better overall performance in high-frequency applications.

In summary, the rotary switch facilitates user interaction, while the combination of 4017 counters, a stable oscillator, and 74HC devices can create a robust circuit capable of delivering precise strobe effects, provided that the design accounts for LED current management to optimize performance and lifespan.The rotary switch is available for $5.00USD as of 2003 from DigiKey under part number EG1951-ND or EG1952-ND. It is a real pain to operate this circuit without a proper switch. You can put multiple 4017 ring counters in series to reduce the duty cycle in order to obtain a more focussed strobe image but you will have to increase LED current to maintain the same level of brightness and that will shorten LED life.

This circuit can be improved a bit by using a more stable STROBE RATE oscillator or by using a regulator to power the oscillator and associated logic. If you do this you should switch to 74HC class devices. 🔗 External reference