LED Thermometer-Temperature Measurement Circuit using LM 34 IC
The LED thermometer circuit is designed to provide accurate temperature readings using either the LM34 or LM35 integrated circuit. The LM34 is a precision temperature sensor that outputs a voltage proportional to the temperature in degrees Fahrenheit, while the LM35 provides a similar output in degrees Celsius.
The circuit typically consists of the temperature sensor (LM34 or LM35), a microcontroller or an analog display driver, and an LED display module. The temperature sensor is connected to the power supply and ground, with its output pin connected to the input of a microcontroller or an analog-to-digital converter (ADC). The microcontroller processes the voltage signal from the sensor, converting it into a temperature reading.
For an LED display, the microcontroller can control a multi-segment LED display or a seven-segment display to present the temperature in the desired unit. If the LM34 is used, the microcontroller will interpret the output voltage and calculate the temperature in Fahrenheit, while the LM35 will provide readings in Celsius.
To enhance the circuit's functionality, additional components such as resistors, capacitors, and possibly a voltage regulator may be included to ensure stable operation and accurate readings. The circuit can be powered by a standard DC power supply or batteries, making it portable and suitable for various applications, including home automation, weather stations, or laboratory environments.
Overall, this LED thermometer circuit is a versatile solution for temperature measurement, leveraging the reliable performance of the LM34 and LM35 sensors.An LED Thermometer which can be used as a temperature sensor or temperature measurement circuit built using LM 34 -a Fahrenheit display or LM 35-degree Celsius display of temperature.. 🔗 External reference
Related Circuits
This LED flasher circuit utilizes the 555 timer integrated circuit (IC). The circuit diagram is straightforward and requires only a few external components. When operational, the red LEDs will flash sequentially at a predetermined frequency, similar to the indicators...
The Spartan-3E board features four LEDs connected to FPGA I/O pins, as detailed in the accompanying table. Each LED's cathode is connected to ground through a 330-ohm resistor. To illuminate a specific LED, the corresponding FPGA control signal must...
This article describes a circuit for a simple single-cell lithium-ion battery charger utilizing the LP2391 regulator IC. The circuit presented is designed for charging a single-cell lithium-ion battery efficiently. The LP2391 is a linear voltage regulator that provides a constant...
An LC meter is being constructed due to the absence of a multimeter capable of measuring inductance. Although the available multimeters can measure capacitance, they lack accuracy for small capacitance values in the range of several picofarads (pF). While...
A simple USB-powered lamp designed to illuminate a desktop during power outages. The circuit operates at 5 volts sourced from a USB port. The 5V from the USB is directed through a current-limiting resistor (R2) and a transistor (Q1)....
The divider acts as the speaker's brain and is crucial for sound quality. The music amplifier's output signal must be processed through a wave filter element to divide it into specific frequency signals for each unit. A scientifically and...